Page 3 of 3 FirstFirst 123
Results 31 to 36 of 36

Thread: 4333 build

  1. #31
    Senior Member macaroonie's Avatar
    Join Date
    Jan 2005
    Location
    near Glasgow Scotland
    Posts
    2,288
    QUOTE=quindecima;433671]Thanks for the detailed post! That should be a no-brainer.[/QUOTE]

    No probs , just try and be smooth with the xacto about 1/16" below the top line of the black goo. You can feel where the cut is , it's only stiff paper pulp after all.

  2. #32
    Senior Member
    Join Date
    Aug 2017
    Location
    WDC USA
    Posts
    310
    Just be extremely obsessive about protecting the voice coil gap from bits of paper or glue getting in there. Use low tack masking tape like the blue tape sold for paint masking. Cutting the dust cap often causes bits of paper to fall in before you can tape it off so I usually use a vacuum to pull out whatever small and light has fallen into the gap but again another very delicate operation. I don't try to salvage dust caps if I cut them off, just replace it with a generic 4" cap. Nothing terribly propriety about 4" discs of cardboard.

    Quote Originally Posted by quindecima View Post
    Thanks for the detailed post! That should be a no-brainer.

  3. #33
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    Great post.

    Ian

  4. #34
    Senior Member macaroonie's Avatar
    Join Date
    Jan 2005
    Location
    near Glasgow Scotland
    Posts
    2,288
    Here's mah cuzzin Wayne settin about a speaker for his truck

    https://www.youtube.com/watch?v=7A8M8HdngS0

    He's a bit rowdy cutting the dust cap off but you will get the idea.

  5. #35
    Senior Member
    Join Date
    Aug 2017
    Location
    WDC USA
    Posts
    310
    Speed reconing. Makes me glad I spent the days with the Mexican ladies on the recone line in Northridge. Nice that he cautioned about the Tee-nuts but he could have mentioned the trick to resetting them after they fall out.


    Quote Originally Posted by macaroonie View Post
    Here's mah cuzzin Wayne settin about a speaker for his truck

    https://www.youtube.com/watch?v=7A8M8HdngS0

    He's a bit rowdy cutting the dust cap off but you will get the idea.

  6. #36
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    That pretty much makes you a national treasure.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4333 cabinet build help.
    By bldozier in forum Lansing Product DIY Forum
    Replies: 2
    Last Post: 05-31-2015, 01:33 PM
  2. L-300 VS 4333
    By markd51 in forum Lansing Product General Information
    Replies: 31
    Last Post: 07-27-2007, 09:11 AM
  3. Build 4333 or other... "these are ghosts in FRANCE"
    By studiolive in forum Lansing Product DIY Forum
    Replies: 13
    Last Post: 04-25-2006, 10:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •