Results 1 to 3 of 3

Thread: Need some advice mounting E-120 in Hagström 4x12 box

  1. #1
    Senior Member
    Join Date
    Aug 2010
    Location
    Jättendal (Giant Valley), Sweden
    Posts
    755

    Need some advice mounting E-120 in Hagström 4x12 box

    I am refurbishing an old Hagström guitar box with E-120 drivers.

    Drivers are mounted from inside with wood screws. The baffle cutout is 367 mm in diameter. According to The E Series Musicdl Instrument Loudspeakers the cutout should be 281 mm.

    I have a few different options here and could use some advice.

    Mårten

  2. #2
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,340
    Can you replace the baffle board?? You could do rings or put a new thinner baffle board in front of the old and screw and glue in place, once again if you have room.

    Rob
    "I could be arguing in my spare time"

  3. #3
    Senior Member
    Join Date
    Aug 2010
    Location
    Jättendal (Giant Valley), Sweden
    Posts
    755
    I can replace the baffle board. It is mounted from the inside with the baffle cloth fastened to it.

    An extra board will also stiffen the baffle which is a good thing. There is place. Thanks Rob!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2234 baffle mounting advice
    By Sootshe in forum Lansing Product DIY Forum
    Replies: 4
    Last Post: 12-26-2017, 07:34 AM
  2. Advice on horn mounting 375/H93
    By Val in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 08-24-2005, 09:01 PM
  3. Mounting
    By paragon in forum Lansing Product General Information
    Replies: 2
    Last Post: 09-27-2004, 08:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •