Look at driver parameter, need Fs and Xmax.
Look at driver parameter, need Fs and Xmax.
are these the right parameter ?
i thought fs is 30,99hz ?
the VAS = 113,83 -> 114 liters :-)
please can you simulate this with a volume of 58liter
a tube with 11cm diameter and the leght of 130mm
Yes, Fs is wrong. Wait a few minutes.
sorry port tube is 11cm diameter and 140mm lenght !
now ive the jbl speaker shop enclosed , crossover module
Compared to the first one. Sim is without any loss from enclosure or so.
Maybe you will not get this low response. Red is Box standing on ground, wall behind. Green is in corner.
'Kevin Garrett give you a copy too?Originally Posted by MatthiasA
John
As you can see, port has to be a little bit longer, maybe 3-5cm. Than you will get flat response.
Eckhard
hmm are you simulating a horn ?
the ME120HS is in a Vented Cabinet !
greetings !
hmm i cant handle the jbl speaker shop !
i will delete it
now i will try simulation with my orginal visaton speaker pro
but i need the
CMS and the RMS ,Xmax SD and nom impedance
Quote:
Originally Posted by MatthiasA
now ive the jbl speaker shop enclosed , crossover module
'Kevin Garrett give you a copy too?
John
no..... i found the zip file on this web page !
http://www.byminsk.com/jbl_speakershop.htm
http://www.avtozvuk.com/infores/soft/jblspkrshp.zip
but if its illegal i will delete it !
greetings
Here is the frequency response of the original S2600:
No, this is not a Hornsim, it`s a Reflex. Can`t explain it here.
Eckhard
ok by the way here s a pic of my adapter !
Sorry, sim was made with a crossover. Here is the new one with the new port length. Port area is 10 x 9.5cm and length is 30cm.
Eckhard
There are currently 1 users browsing this thread. (0 members and 1 guests)