Results 1 to 3 of 3

Thread: Repair/Reinforce JBL 035TIA Tweeter Terminals

  1. #1
    Junior Member
    Join Date
    Oct 2006
    Location
    Texas
    Posts
    4

    Repair/Reinforce JBL 035TIA Tweeter Terminals

    I recently removed some 035TIA tweeters from my L80T speakers and both had terminals that had come loose. I was able to continue by cutting the wires instead of trying to pull the wires off of the terminals. Both still work by the way. I used super glue gel to glue down the terminals and I will pull off the wires (using pliers to hold the terminals down) after the glue has cured for 24 hours. Can I use epoxy on top of the original brown glue to reinforce the terminals?

  2. #2
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,681
    If they are for your own use and not resale, then appearance isn't important. You could drill a hole and use a screw and nut to hold the terminals.

  3. #3
    Senior Member SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    sheltering in place
    Posts
    9,443
    Quote Originally Posted by Don C View Post
    If they are for your own use and not resale, then appearance isn't important. You could drill a hole and use a screw and nut to hold the terminals.
    a little less extreme, you could solder them down
    STRANGE ....is the new NORMAL

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL 035TiA Tweeter Screen
    By miklemke in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 04-25-2010, 07:30 PM
  2. Upgrade tweeter in C70 Alpha I to 035TiA or not?
    By Henry Chris in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 09-05-2005, 08:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •