Best driver to take over from JBL 2450 on E-JMLC 300 horn crossed at 8000 hz to Beyma Slot tweeter now.
Looking to drop the crossover point down to say 6000 hz any non JBL would be acceptable. Compression driver or Ribbon?
Best driver to take over from JBL 2450 on E-JMLC 300 horn crossed at 8000 hz to Beyma Slot tweeter now.
Looking to drop the crossover point down to say 6000 hz any non JBL would be acceptable. Compression driver or Ribbon?
Hi David,
There are so many driver manufacturers in Europe that I can't imagine you not finding something appropriate... In addition to Beyma mentioned:
Fane International, B & C, RCF, Faital Pro, 18 Sound, Celestion, Tymphany, etc. Regards,
Richard
How about a JBL 2404 ?
I havn't heard them but I would go for E-JMLC-1400 and BMS 4526HE. You need to make a 16 mm to 19 mm adapter.
Mårten
Take off the snout on the 2450 creating a sort-of 2451 with 1.5” exit. Use an adapter plate for the wider bolt circle under the snout an mount to a moder wave guide. The 1.5” exit works much better even on the 2450. Then you would be good to at least 16k with SL dia`s so you can ditch the uhfs.
Also much easier to get a 2-way to work than a 3-way.
Kind regards
//Rob
The solution to the problem changes the problem.
-And always remember that all of your equipment was made by the lowest bidder
There are currently 1 users browsing this thread. (0 members and 1 guests)