Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: JBL 4311B Control Monitor Polarity Confusion

  1. #16
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,959
    Did ANYONE even look at the JBL Proservice pdf I linked? The answer is plain as day on the wiring diagram on it!
    Yes and I suggest you look at it again because you got it wrong

    Rob
    "I could be arguing in my spare time"

  2. #17
    Senior Member SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    PDX, Žegon
    Posts
    9,034
    Not to stir things up , but ...

    is it not possible to just put a multi-meter on the drivers leads and see which way produces positive results when signal is applied
    I'm getting tired of Winning ....

  3. #18
    Senior Member RMC's Avatar
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    578
    RE post # 12: "I found a JBL's 'Technical Notes, Volume 1 Number 12' document I found on Polarity (I tried to attach it). It's dumbfounding how they do not mention the 4311B monitors,"

    Look at the following pic, items 1 & 2 in the first group and item 5 in the second group, it may help clarify this matter and others... Regards,

    Richard


    Name:  IMG_0509.jpg
Views: 73
Size:  104.5 KB

  4. #19
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,959
    Not to stir things up , but ...

    is it not possible to just put a multi-meter on the drivers leads and see which way produces positive results when signal is applied
    Sure the 4311/4312 have the woofers running fullrange. You could do the battery test. The caps will protect the midrange and the tweeter from DC. They should have standard polarity when wired correctly.

    Rob
    "I could be arguing in my spare time"

  5. #20
    Senior Member DavidF's Avatar
    Join Date
    Apr 2003
    Location
    San Jose CA
    Posts
    909
    Quote Originally Posted by short_circutz2 View Post
    Did ANYONE even look at the JBL Proservice pdf I linked? The answer is plain as day on the wiring diagram on it!
    Yes, but you are misreading the intent of the symbols, I believe.

    The driver "+" and "-" are the driver input and return terminals, respectively, not representing positive or negative polarity of the driver.

    Systems of this vintage used a convention of wiring coming out of the network that had the solid colored wire attached to the driver input, regardless of the whether the signal it carried was signal in or signal return. The black or striped wire was attached to the driver return terminal.

    For this 4311B the signal coming in from the amp is carried through the red "+" input on the enclosure input terminal and then passed through to the woofer return "-" terminal (black) by way of the green/black wire coming out of the network.

    So, if you are trying to confirm whether the system is wired correctly, just follow the convention that has the solid network wires hook up to the driver input, "+" or red, and the striped wire to the return, or black. Some mids and tweeters used quick-connect terminals that could only be connected one way.
    David F
    San Jose

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4311B or 4312 mk II Control Monitors
    By koyuga in forum General Audio Discussion
    Replies: 2
    Last Post: 02-10-2012, 05:33 AM
  2. JBL 4411 Control Monitor score
    By Gannon in forum Lansing Product General Information
    Replies: 43
    Last Post: 01-29-2011, 07:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •