im re capping some L 100 crossovers.dose anyone have recommendations on what brand caps to use ?
the first set I used 3.3 Clairity and a 8.0 solen Thoughts ?
Z
im re capping some L 100 crossovers.dose anyone have recommendations on what brand caps to use ?
the first set I used 3.3 Clairity and a 8.0 solen Thoughts ?
Z
Does the caps' brand really matter? For crossover networks I prefer proven industry standard MKP's for smaller capacitances and motor capacitors for larger values. I doubt that these capacitors can be discerned from Solen's and the like in double blind tests.
Best regards!
Unlike Kay I don't like mixing types/brands of caps, the original XOs are made with only one brand/type (and if not that means the very specs of each cap type has been taken into account, even more complicated to upgrade without messing the sound) so I'm more comfortable when they are of the same brand and series. Each time I've used mixed techs (like PIO, films...) it went out of balance. YMMV.
But, like Kay, I'm very happy with industrial names, on my 4406 I've used cheap Arcotronics MKP bypassed with polystyrene caps. http://www.audioheritage.org/vbullet...l=1#post395093 What can I say beside I wish I hadn't sold them...
On my beloved 4313Ti I've used my fav industrial one, Icel MKP PHC series, polystyrene bypassed again. http://www.audioheritage.org/vbullet...l=1#post392290 I used them in many speakers, like the delicate B&W DM4 and never looked back. But as one can see I've used them charge coupled, which, in short, holds the cap tight, but some well built caps are said to be nice sounding as their construction got them tightly rolled in a tube, in a way the same as charge coupled. So if you don't go charge coupled, which seems the case, I would recommend well built MKP, like:
Cheap: Icel PHC (if you can find them) bypassed with nicely built K71-4 Polystyrene:
https://www.ebay.fr/itm/10x-K71-4-0-...R/163621088952
or:
http://www.store.diyhifisupply.com/O...mium-Film-Caps
http://www.jantzen-audio.com/superior-z-cap/
and test/keep the bypass if sound suits you (remember that's a JBL practice )
Money in Mundorf Sliver-Oil is overkill on L100 IMHO.
And for what it's worth:
http://www.humblehomemadehifi.com/Cap.html
Erm, my motor capacitors are MKP's !
Frankly, I buy most of my components from surplus when they are cheap .
Best regards!
you do realize that this is all that's involved
there isn't even a xover between the LF & MF .... LF just runs full range.
Some kind of happiness is measured out in miles
Never wouldn't have dared to believe that it is that sophisticated !
Best regards!
Ahhh those Germans
There are currently 1 users browsing this thread. (0 members and 1 guests)