Results 1 to 2 of 2

Thread: audible pop

  1. #1
    Senior Member pyonc's Avatar
    Join Date
    Dec 2009
    Location
    Maryland
    Posts
    700

    audible pop

    I currently listen to JBL Olympus with McIntosh MC240 as the power and McIntosh C22 as the tube preamp.
    Now, all good except for the audible pop through the speakers when I turn off the power amp, with C22 on, first after listening.
    The pop is very brief & sharp (NOT from woofers, etc).
    I tried different preamps like JBL SG520 and McIntosh C24, but I don't any pop, fortunately.
    So, clearly there must be something wrong with C22, though all its functions work alright.
    On googling on this, I see something like a DC current leak or bad capacitors, etc of the preamp.
    Before I take it to the tech shop, I'd like to ask for your opinion or solution, as usual.
    Thanks much for your feedback in advance.

  2. #2
    Senior Member
    Join Date
    Feb 2019
    Location
    Germany
    Posts
    253
    Hi,

    hard to discern as the MC-240 schematics that is available from elektrotanya.com doesn't show any mains switch at all?!?

    Do you have a voltage meter that allows you to measure possible leakage voltages at the C-22's output?

    What happens if you turn the MC-240's volume controls fully ccw?

    Best regards!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •