Results 1 to 4 of 4

Thread: Crown iTech fans

  1. #1
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    811

    Crown iTech fans

    Have anyone experimentet with replacing fans on iTech amps?

    As far as I’ve read they use very high power (and noisy) 70x70 and 60x60 fans.

    The problem is that the fans are controlled from the amp via 4 wire cable: stable 12v, PWM and tachometric. If one replace the fan with a lower RPM the amp goes into protect.

    Any idea how to get a good solution for replacing fans so the iTech can be used within the hifi/HT room??

  2. #2
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,662
    I think I'd start by looking up the original fan by its maker and part number.
    Then start looking in fan spec tables for something similar but quieter. Try this:

    https://www.newark.com/w/c/cooling-t..._1001473_EN_US

  3. #3
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    811
    From another user/website:
    The amp has two fans, the one that cools the amplifier modules is a 70x70x35mm, 12v 1.1A, Nidec UltraFlo fan (model T70E12BUA5) capable of running up to 10,000 RPM. The other fan cools the power supply and is a San Ace 60, 24v 0.85A fan. Both fans are regular 4pin PWM fans.
    Adding a resistor to the fan power does slow the fan but the amp goes into “protect” mode.
    Changing the fan with a slower fan also makes the amp go into “protect” mode.
    The amp is too smart, it monitors the fan speed and knows how fast the fans should be running when it detects a lower RPM than it is expecting the amp goes into “protect” mode.
    The crown manual states “variable-speed fans with tachometer feedback. Microprocessor monitors fans, and signals an

  4. #4
    Senior Member HCSGuy's Avatar
    Join Date
    Jan 2009
    Location
    Bend, OR
    Posts
    600
    If you find a reliable solution, I would love to know and would make the modifications. My equipment is going to be in a closed equipment closet, but if it is still audible, and there is no fan mod, I will move the amp to my basement equipment rack where no one but the mice will hear it Good luck!
    That the internet contains a blog documenting your life does not constitute proof that your existence is valid. Sorry.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. M2 BSS/iTech HD and software woes
    By Aaron in forum Lansing Product Technical Help
    Replies: 8
    Last Post: 04-04-2016, 02:04 PM
  2. Genesis fans
    By JBL 4645 in forum Music
    Replies: 0
    Last Post: 05-17-2007, 11:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •