Results 1 to 2 of 2

Thread: Grill frame pegs and grommets from 1977 JBL L100's

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Location
    Darien,Il
    Posts
    1

    Grill frame pegs and grommets from 1977 JBL L100's

    Can anybody tell me if JBL used the same sized pegs on their cabinets and the same sized rubber grommets on grill frames on all their "L series "speakers in the late 70's? Will L56 pegs and grommets fit into my L100 cabinets and grill frames? Is adhesive used in the installation or are they just tapped in the existing holes on the cabinets and speaker frames?Thanks for your help.TA

  2. #2
    Senior Member gsb001's Avatar
    Join Date
    Mar 2008
    Location
    Huntley ILL. Chicago Land Area
    Posts
    343

    Grille Mounting Posts

    Hi Tom,
    The mounting post is pressure fit into a 3/8 inch cabinet hole.

    L100 and L56 use the same mounting post.
    It's a very common style used over several full line generations.

    L56 and lots of other grilles are one piece held in place using mounting pegs.

    L100 used two piece grilles. The walnut frame was held in place with mounting posts and the foam inserts were glued to cheese cloth stapled to the walnut frame.

    ATTACHED PICTURES:
    Two L100 walnut frames with red inserts installed.

    Thank you
    SB
    HuntleyAudio.com
    Attached Images Attached Images   
    Steve Barnes
    Huntley Audio.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Press-fit rubber grill grommets
    By Maxwelhse in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 08-14-2010, 03:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •