Well i just refoamed the woofers on soem jbl l26.
I used the 30hx method.
One seems good, not sure about the other.
On the good one...werever i press on the cone it is silent...no rubbing at all.
On the other, if i press in the very centre or on one side it is ok, no running.
But if i press on the other side or just off centre on that side then there is rubbing (1cm off centre).
Should there be no running wherever i press on the ocne?
OK?
Refoam?
Can i loosen one side and reglue?
Thanks for any advice