Hello,
First post. 30 year Klipsch listener, migrating to older JBL!
I have a pair of 4343's that are completely original with only the foam surrounds redone. One tweeter went out which was the capacitor, which was changed on both crossovers. Upon removing the drivers from the cabinets, I did not PROPERLY tape or mark the POSITIVE and NEGATIVE wires going directly into the drivers; now I'm second guessing my ignorant and careless self.
Woofer = Solid Green and Green with small black stripe
10" Midrange = Solid White and White with small black stripe
Horn = Solid Yellow and Yellow with small black stripe
Tweeter = Solid Orange and Orange with small black stripe
I'm assuming all of the SOLID wires would be connected to the RED or Positive terminals...and wires with small black stripe would be to BLACK terminals.
I thought the biggest hurdle was diagnosing the dead tweeter, now I'm stuck.
Thank you to anyone who would consider pointing me in the right direction; what a fantastic forum.