Hello,
Can anyone recommend a replacement product for the white gasket around the 077 Tweeter?
Hello,
Can anyone recommend a replacement product for the white gasket around the 077 Tweeter?
It is JBL Part Number 51795 and now listed as "black" vinyl gasket. It shows as current but not in stock (showing a month backorder) and, depending on where you get it from, under $2.00 (plus shipping). So, I'd say JBL/JBL Dealer.
Go to a hardware store and purchase an O ring the same size
Rob
"I could be arguing in my spare time"
The pricing/availability I get from JBL (I'm a certified reconer). As for the part.
I got the part number off of the L65 Tech sheet that used the 077 http://manuals.harman.com/JBL/HOM/Te...Jubal%20ts.pdf
In the JBL Ordering System, it is called: GASKET, BLK VINYL 077
They note that driver replacement is the 2405 and I checked that sheet:
http://www.jblproservice.com/pdf/Dis...dels/2405H.pdf
Note, it is the same part number.
Hello BarryYou sure could except standard O rings are not hollow core and don’t have near the compressibility/compliance.
Your right still think it will work though. Some of the newer black ones I have are kinda hard compared to the white ones. These are not for 2405's but used for 2105 the 12's and 14's
Rob
"I could be arguing in my spare time"
Hi Rob;
I should do some homework. Hewland racing transmissions use a white foam core round cord material for case to case seals that are very compliant. It was also bondable so one can make rings with it.
That stuff has to be available on his side of the pond. I will see.
My best,
Barry.
If we knew what the hell we were doing, we wouldn't call it research would we.
There are currently 1 users browsing this thread. (0 members and 1 guests)