+ Reply to Thread
Results 1 to 2 of 2

Thread: Network for 2450 and 2405

  1. #1
    Member
    Join Date
    Nov 2004
    Location
    Stockholm, Sweden
    Posts
    33

    Network for 2450 and 2405

    For test purpose I would like to set up a passive network for my horns.
    I run a 2450H with a Tractrix horn from 700Hz active divided and slightly lifted in the upper treble. Now I would like to try the 2405H from say maybe 8-10K instead.
    Anyone have some suggestions? A suitable drawing?
    The use is in home stereo/cinema setup.

    Bengt

  2. #2
    Senior Member
    Join Date
    Nov 2003
    Location
    Toronto
    Posts
    1,010
    I have had good success with the 4333/a high pass network. Take a look at the schematic, it's easy to roll one for yourself. I believe I read here in the forum the aggregate result is a third order -18 dB/octave at about 8 KHz.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2405 seals
    By majick47 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 12-19-2004, 09:28 PM
  2. Network
    By paragon in forum Lansing Product General Information
    Replies: 4
    Last Post: 12-18-2004, 06:41 AM
  3. 2405 Brackets
    By majick47 in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 10-20-2004, 01:02 PM
  4. adjust network between 2425 and 2405
    By delahais in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 10-07-2003, 10:51 AM
  5. 2405 network
    By Jakob in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 05-01-2003, 01:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts