I have 2 pairs of A7-500 cabinets one pair has 416's with 8ohm coils...the other pair has 421-8H's.
2 811 horns
4 511 horns.
2 908-8A drivers
2 806A drivers with 8 ohm diaphragms
2 drivers that are almost identical to the 806's but a little over 1/2" longer that I assume are 802D's. They also have 8 ohm diaphragms.
What would be the best horn/driver combination to match with cabinets with the 416's?
What would be the best horn/driver combination to match with cabinets with the 421-8H's?
I will bi-amp one set and use N-500E Dividing Networks or make some Hiraga 8 ohm crossovers like the ones on Pete Riggles page.
My skills lay with hardware building and hope someone with the technical expertise can give me some ideas of what combinations should be best and hopefully explain
why in layman's terms. I will probably try different combinations but would like to start with what is technically the best.
Thanks for having such a great source of information available.