I have a pair of JBL 3106 crossovers that I would like to use if it makes sense. I saw these great graphs in the forum http://www.audioheritage.org/vbullet...=3051#post3051 for the 3105 and 3106 crossovers with 8 and 16 ohm speakers. I want to crossover over a 2405H to a 2441/2311 with this crossover if possible. The 2441 has 2445J (16 ohm) diaphragms in them. So I have the situation where one is an 8 ohm driver and the other is a 16 ohm driver. From the graphs I would have a substantial dip at about 7.5khz because of the impedance differences. My question is : a) should I use this as is and use equalization to reduce the dip or b) would someone know how to modify the circuit to accommodate change the larger rolloff of the 8 ohm 2405?

I would greatly appreciate help on this issue and thank you for the advice.

Regards,
Gary