Results 1 to 4 of 4

Thread: low pass mono crossover

  1. #1
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    825

    low pass mono crossover

    hello, friends.

    i'am doing a mono sub for my main system id like to use a JBL network crossed under 200Hz or lower if possible.
    i see the only network offered was a 3145 i think 320Hz, and a handful of "other" networks at 500Hz.

    did JBL do a mono network ever.
    do mono sub filters exist in a home hi setup?

    which networks could i use with a mono powered sub from JBL discriminately.

  2. #2
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    825

    bx63/a ~ 5235

    so I've done some reading and i see that the BX63,BX63A has been used in the sub. from my understanding
    this may be an option barring it could be located.

    the 5235 card has also been mentioned as a mono sub network playing down to 290Hz, could the card(s) be modified to
    take the crossover down to 80~120Hz

    oOo, i see BX63a kits, i think i will take one.

  3. #3
    Senior Member
    Join Date
    May 2007
    Location
    Ingolstadt in Germany
    Posts
    457

    simple solution

    This solution requires two resistors, 1 kOhm or 2 kOhm each. The outputs are added to each other, giving a mono sum signal. The resistors isolate the outputs from each other and are REQUIRED.

    Ruediger

    PS: the outputs are those at the crossover, and the mono output goes into the power amp.
    Attached Images Attached Images  
    Last edited by Ruediger; 12-28-2017 at 09:01 AM. Reason: clarification

  4. #4
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    825
    i think the idea of using the kit would make my feeble, attempt at a diy occurrence
    obsolet, the kit mr junkuno constructed will be more then adequate for my home system.

    but thanks.

    gold plated?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. modifying Nelson Pass 4333 crossover mod for bi-amp
    By David24x7 in forum Lansing Product DIY Forum
    Replies: 10
    Last Post: 10-27-2018, 01:42 AM
  2. 813 B Low Pass Crossover
    By David Ketley in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 08-22-2010, 08:26 AM
  3. All Pass Crossover Network??
    By Guido in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 01-07-2007, 06:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •