Results 1 to 3 of 3

Thread: 2405 seals

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    majick47
    Guest

    2405 seals

    Noticed the white seals that go on the square base of my 2405 tweeters are missing, might still be at the JBL pro shop but if thet arn't I have the Parts Express 3/8 foam "weatherstripping" that I was planning on useing on all my components going into my L200b speakers. Will the Parts Express "weather stripping" be a good substitute for the 2405 white seals? I'm guessing the seals are used to make a air tight seal between the 2405 tweeter and the baffle board. The 3 1/8" cutouts for the 2405 tweeters is a perfect fit. The cut is very clean and in fact smoother then the factory cuts for the LE85 and 136A.

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963

    #51795

    The "noodle" is available for purchase, no doubt.

    Weatherstrip will work as well, just not as "nifty" as the noodle.

    http://www.jblproservice.com/pdf/Dis...dels/2405H.pdf

  3. #3
    majick47
    Guest

    2405 Gaskets

    Thanks Zilch for the info re the 2405 noodles/gaskets. The JBL tech probably forgot to put them back on the tweeters and if they got misplaced I'll have him order a couple new ones. Figured they acted as gaskets and the Parts Expess weather stripping on all the components should make for a tight seal to the baffleboard. Hope to have all my updated L200b components back from the JBL pro shop this week and playing the best Christmas tunes ever.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2405 Brackets
    By majick47 in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 10-12-2015, 10:47 AM
  2. 2405 diaphragm replacement procedure
    By endeeinn in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 08-14-2005, 07:40 AM
  3. 2405 diaphragm identification
    By endeeinn in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 01-20-2005, 03:24 PM
  4. Diaphragma 075 the same as 2405 Alnico?
    By Dieter in forum Lansing Product General Information
    Replies: 7
    Last Post: 06-19-2003, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •