2235H recone

[grumpy]

lol, or epoxy and some solder. (mass rings)
If the voicecoil gets to 600F there will be worse issues to deal with.

[cooky1257]

...but the foil says 2235, I'm still laughing. It isn't a 2235, mass ring or not.

[ivica]

Surround disintegrated and apparently the VC bottomed in the slot. Could not move cone up/down by hand. Finally wiggled it out and some of the coil on the bottom was bent at right angles.

1. Suggestions on what fluid will make getting the glue holding the spider to the frame and what held the surround to the frame easier to remove?

2. Suggestions for a good cone kit? Even if I could find an OEM it would be expen$ive.

Hi

Why not use old mas ring (35gr) or make it from aluminum, cooper, solder-wire.....

1. Voice Coil 2235H:
https://www.ebay.com/itm/JBL-2235H-2230H-VOICE-COIL-SPEAKER-PARTS-REPAIR/291906473690?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D41375%26meid%3D697d351644e045 7cb826028de2098bbe%26pid%3D100033%26rk%3D1%26rkt%3 D2%26sd%3D291906473690&_trksid=p2045573.c100033.m2 042

or
http://reconekits.com/jbl2204-22408ohmvoicecoil-1.aspx

2.re-foam kit:
https://www.ebay.com/itm/172504104168?ul_noapp=true

regards
ivica

[Donald]

...but the foil says 2235, I'm still laughing. It isn't a 2235, mass ring or not.

Please explain.

[Donald]

How long should I wait until I crank this thing up?

Let spider glue cure for a day.
Let foam glue cure for a day.
Let mass ring glue cure for a day.
Let dome glue cure for a day.

So spider glue has now set for 4-5 days.

Found an OC Speaker label on it but no date. I put my own label with date and non-oem disclosure on it.

[1audiohack]

I small signal test before I even solder the tinsels and put them to use the next day.

Barry.

[cooky1257]

Please explain.

Using an after market cone and worrying about a mass ring because it says 2235 on the foil- the use of the former completely destroys any authenticity in the latter.

[dubkarma]

Real JBL kits for those are about $205. Mass rings aught to be about $8.50, $85‘s a joke.

Can anyone suggest where to obtain the 2235 mass rings?

I'm getting a pair of 2225s reconed as 2235s, but my recone guy tells me that the cone kits do not include the mass ring.

He also suggested he could fashion a 35 gram equivalent from copper wire and install that, but I'm not sure that's the way to go.

Any tips appreciated!

[Earl K]

Can anyone suggest where to obtain the 2235 mass rings?

I'm getting a pair of 2225s reconed as 2235s, but my recone guy tells me that the cone kits do not include the mass ring.

He also suggested he could fashion a 35 gram equivalent from copper wire and install that, but I'm not sure that's the way to go.

Any tips appreciated!

I'm pretty sure that authentic JBL recone kits still include the mass ring .

You might want to query your reconer about just what he's actually using .