Page 2 of 2 FirstFirst 12
Results 16 to 24 of 24

Thread: 2235H recone

  1. #16
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,352
    lol, or epoxy and some solder. (mass rings)
    If the voicecoil gets to 600F there will be worse issues to deal with.

  2. #17
    Senior Member
    Join Date
    Dec 2007
    Location
    wirral UK
    Posts
    670
    ...but the foil says 2235, I'm still laughing. It isn't a 2235, mass ring or not.

  3. #18
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,637

    2235H re-foam

    Quote Originally Posted by Donald View Post
    Surround disintegrated and apparently the VC bottomed in the slot. Could not move cone up/down by hand. Finally wiggled it out and some of the coil on the bottom was bent at right angles.

    1. Suggestions on what fluid will make getting the glue holding the spider to the frame and what held the surround to the frame easier to remove?

    2. Suggestions for a good cone kit? Even if I could find an OEM it would be expen$ive.
    Hi

    Why not use old mas ring (35gr) or make it from aluminum, cooper, solder-wire.....

    1. Voice Coil 2235H:
    https://www.ebay.com/itm/JBL-2235H-2230H-VOICE-COIL-SPEAKER-PARTS-REPAIR/291906473690?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D41375%26meid%3D697d351644e045 7cb826028de2098bbe%26pid%3D100033%26rk%3D1%26rkt%3 D2%26sd%3D291906473690&_trksid=p2045573.c100033.m2 042

    or
    http://reconekits.com/jbl2204-22408ohmvoicecoil-1.aspx

    2.re-foam kit:
    https://www.ebay.com/itm/172504104168?ul_noapp=true

    regards
    ivica

  4. #19
    Senior Member Donald's Avatar
    Join Date
    Jan 2004
    Location
    Las Vegas, CA
    Posts
    524
    Quote Originally Posted by cooky1257 View Post
    ...but the foil says 2235, I'm still laughing. It isn't a 2235, mass ring or not.
    Please explain.
    had L25,L36,L40,L120,L222,L300,AquariusIV(2),S1,4408
    have L65,L100,L222,DorianS12,B380

  5. #20
    Senior Member Donald's Avatar
    Join Date
    Jan 2004
    Location
    Las Vegas, CA
    Posts
    524
    How long should I wait until I crank this thing up?

    Let spider glue cure for a day.
    Let foam glue cure for a day.
    Let mass ring glue cure for a day.
    Let dome glue cure for a day.

    So spider glue has now set for 4-5 days.

    Found an OC Speaker label on it but no date. I put my own label with date and non-oem disclosure on it.
    had L25,L36,L40,L120,L222,L300,AquariusIV(2),S1,4408
    have L65,L100,L222,DorianS12,B380

  6. #21
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    2,743
    I small signal test before I even solder the tinsels and put them to use the next day.

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  7. #22
    Senior Member
    Join Date
    Dec 2007
    Location
    wirral UK
    Posts
    670
    Quote Originally Posted by Donald View Post
    Please explain.
    Using an after market cone and worrying about a mass ring because it says 2235 on the foil- the use of the former completely destroys any authenticity in the latter.

  8. #23
    Member
    Join Date
    Jun 2009
    Location
    Toronto, Canada
    Posts
    54
    Quote Originally Posted by 1audiohack View Post

    Real JBL kits for those are about $205. Mass rings aught to be about $8.50, $85‘s a joke.
    Can anyone suggest where to obtain the 2235 mass rings?

    I'm getting a pair of 2225s reconed as 2235s, but my recone guy tells me that the cone kits do not include the mass ring.

    He also suggested he could fashion a 35 gram equivalent from copper wire and install that, but I'm not sure that's the way to go.

    Any tips appreciated!

  9. #24
    Senior Member
    Join Date
    Apr 2003
    Location
    Richmond Hill, Ont.
    Posts
    4,726
    Quote Originally Posted by dubkarma View Post
    Can anyone suggest where to obtain the 2235 mass rings?

    I'm getting a pair of 2225s reconed as 2235s, but my recone guy tells me that the cone kits do not include the mass ring.

    He also suggested he could fashion a 35 gram equivalent from copper wire and install that, but I'm not sure that's the way to go.

    Any tips appreciated!
    I'm pretty sure that authentic JBL recone kits still include the mass ring .

    You might want to query your reconer about just what he's actually using .



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. jbl 2226h recone with jbl 2235h
    By gene in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 09-07-2007, 01:37 PM
  2. Can JBL 2225H recone to 2235H?
    By Russellc in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 07-20-2007, 03:02 PM
  3. jbl 2226h recone with jbl 2235h
    By gene in forum Forum Feedback
    Replies: 3
    Last Post: 09-06-2005, 09:09 AM
  4. Does anybody know the M32-8, 15"? Recone to 2235H question...
    By Ralf in forum Lansing Product Technical Help
    Replies: 19
    Last Post: 05-14-2004, 05:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •