Results 1 to 4 of 4

Thread: LE85/H91 in L200

  1. #1
    Senior Member Donald's Avatar
    Join Date
    Jan 2004
    Location
    Las Vegas, CA
    Posts
    527

    LE85/H91 in L200

    I won an auction for a pair of LE85/H91 from a L200. They came with a flat steel metal bracket mounted between driver and horn. Was this used because the L200 mounting position required it or because the H91 horn can't support the LE85 like it is supported by the H92 in the L300 by 4 bolts on the front of the horn?
    had L25,L36,L40,L120,L300,AquariusIV(2),S1,4408 have L65,L100,L222,DorianS12,B380

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963

    Yes.

    The driver is not "otherwise" supported in L300?

    http://www.lansingheritage.org/image...l300/page3.jpg

  3. #3
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,715

    No.

    Well Yes and No.

    The horn can support the driver just fine. The problem is the particle board baffle. In shipment the leverage of that 10lbs + weight at the end of the horn tends to break the baffle. If you don't plan on shipping your speakers or if you use plywood there is no need to use a brace. You can also use a padded brace from the rear that cradles the driver.

    Widget

  4. #4
    Senior Member Donald's Avatar
    Join Date
    Jan 2004
    Location
    Las Vegas, CA
    Posts
    527
    Zilch,


    Yes and no. You mount the LE85/H92 to the front baffle through an access hole in the back. The plate covering the access hole has some foam sheet covered bracing. Not sure if the driver is actually sitting on the bracing when the plate is on.
    had L25,L36,L40,L120,L300,AquariusIV(2),S1,4408 have L65,L100,L222,DorianS12,B380

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L200 Network Schematic...?
    By boputnam in forum Lansing Product Technical Help
    Replies: 19
    Last Post: 07-10-2006, 10:30 AM
  2. Help, Upgrade Woofers On L200
    By Iconic in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 07-01-2004, 01:25 PM
  3. L200 Studio Master Xover and Other Qs
    By elektratig in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 02-17-2004, 10:01 PM
  4. L200 in Oak Veneer?
    By Audiokarma in forum Lansing Product General Information
    Replies: 18
    Last Post: 09-14-2003, 03:30 PM
  5. L200 memories
    By Charley Rummel in forum Lansing Product General Information
    Replies: 4
    Last Post: 09-11-2003, 07:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •