Does anybody on this forum know if this oil still is available??
I bought my Original 4333A in 1976 and this can of Original JBL was delivered with them. I have maintained my 4333's with it since.
Does anybody know if it's available or if not - what would be the closest receipee - product.
Please look at the scanned pic.
The high-end designer furniture manufacturer, sends out small cans of "Gunstock Oil" for periodic refreshing of the finish on its oiled rosewood and walnut products such as Eames chairs and tables. It's darker than some others.
Forumites have had good results with Watco Danish Oil finish, though I hate the smell of that stuff. It dissipates after about a month or so, tho.
Also, Flecto Varathane's "Natural Oil" works nicely. A light amber color.
The key to all of these is to wipe off excess oil before it dries if you want that JBL standard dry-appearance "flat" finish....
If you want to mantain the patina Mr. Zilch is correct. Watco is a wonderful, albeit, "smelly" product. Miniwax has a wood specific product called conditioning/finishing wax that when applied generously and let sit in 68-76 degree ambient temp for approx 1.5hrs, can be "burnished" to deliver a gorgeous "matte" luster while conditioning the wood.
BTW: Kool Kan!
I recall JBL having printed instructions for the L100s that described how to formulate a "cocktail" for preserving the wood and its finish. I don't have it in front of me, but it seems like it was equal parts turpentine and linseed oil. I kept a jar of this stuff around for years and gave the L100s a good rejuvenation annually. I haven't done it for about a decade now--guess I should.
Does this formula ring a bell?
Out.
The ingredients listed on the can "5% toluene, 20% napatha, 75% mineral spirts are all readily available products to the public. This formula is a standard one that us finishers mix with UTC (ultra tinting colors) to make glazes. One of my associates, Pat Kelly, worked @ JBL in the finishing dept. during the early 70's and confirms they used this extensively on consumer product lines.
Yes, that's exactly the card I have in my hand at the moment.Originally Posted by Steve Gonzales
Out.
JBL says use boiled linseed oil and turpentine?! Gee, where have I heard that one before? Hmmm.. sounds familiar. I bet if you change the ratio, and instead of TWO parts boiled linseed oil, substitute one part white vinegar, you would have an excellent CLEANER and conditioner for really filthy cabinets covered with water soluble crud like cigarette smoke scum/film, sticky crap etc. I also bet the turpentine is to speed drying time and remove the greasy contaminates and old wax products that may be present. No need for the vinegar, obviously, if your boxes only need refreshing and not deep cleaning.
With regards,
Analogman
Maintaining JBL Enclosure Finishes
Got a later version with Casitas Ave on it, this one came from a paragon owner. It only has the size of 96 x 171mm or 3,75 x 6,75" and is printed in what appears to have been J.B.'s favorite colors back then, red on orange.. maybe that is why I couldn't find a proper scan of it here.
So I had to take pics and photoshop them a bit, for future reference.
Greyscale:
(I think softer lighting would really be the key, though)
....so many recipes..Jeez! ......"Formsby's Furniture Oil", wipe it on, polish it off at any True Value Hardware store; maybe some others.. $6 maybe for a quart tin. I use "Selmer's" clarinet bore oil at $2 for a little bottle which goes a long way on my guitar necks etc. Works fine on all my vintage wood cabinetry (old radios and gramophones). For my cherry wood Altec M-14's, Steinway Furniture Care...spray it on, polish it off. All leave an absolutely gorgeous finish. I use it on my vintage Columbia shown before a cleaning. Remember, it's just a wood veneer. Tanx, Jeenie
Last edited by jeenie67; 02-28-2009 at 06:14 PM. Reason: forgot the n inan,
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote