Results 1 to 8 of 8

Thread: Will there be sonic difference between a 8 and a 16Ohm diaphragm.

  1. #1
    Member
    Join Date
    Feb 2012
    Location
    The Netherlands
    Posts
    52

    Will there be sonic difference between a 8 and a 16Ohm diaphragm.

    I red once there will be a sonic difference between a 16 and 8Ohm diaphragm in a 2446, so far have only used 16ohm, but I can buy a set of 2450Sl diaphragm's and they are 8 Ohm, so I was wondering if its true or a ghost story.

  2. #2
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,095
    My experience is they sound and measure just the same.

    My experience is based on using solid state power supplies. I don’t know how and if tube amps respond differently.

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  3. #3
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,743
    ... assuming you are not using the same passive network (e.g., either crossing over electronically or using passive networks with some level adjustments and designed for each impedance).

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,734
    Quote Originally Posted by Hans Bleeker View Post
    I red once there will be a sonic difference between a 16 and 8Ohm diaphragm in a 2446, so far have only used 16ohm, but I can buy a set of 2450Sl diaphragm's and they are 8 Ohm, so I was wondering if its true or a ghost story.
    I agree with both of the previous posters, but will add that impedance aside the aquaplas coated 2450SL diaphragm will sound different than the stock 2446 diaphragm.


    Widget

  5. #5
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by Mr. Widget View Post
    I agree with both of the previous posters, but will add that impedance aside the aquaplas coated 2450SL diaphragm will sound different than the stock 2446 diaphragm.


    Widget
    Hi Mr.Widget,

    Not to mention that SL diaphragm is not 'ribbed', on the contrary 2446 diaphragm is ribbed type. And some kind of differences exist between ribbed and non-ribbed (2445) type too.

    Some of my measurements have shovn that ribbed type is less prone to break-up up to about over 12kHz, but over that its 'oscillation' is very pronounced, while 2445 has shown a kind of breakup near 10kHz, but its 'oscillation' is less pronounced.

    regards
    ivica

  6. #6
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,095
    One would think I would have learned to be thorough by now.

    I did mean diaphragms that are of identical materials and construction save the impedance of the voice coil in my experience sound identical when power level matched.

    As an example D8R475 vs D16R475.

    My best,
    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  7. #7
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,734
    Quote Originally Posted by 1audiohack View Post
    I did mean diaphragms that are of identical materials and construction save the impedance of the voice coil in my experience sound identical when power level matched.
    I knew you meant that... but thought others may not.


    Widget

  8. #8
    Member
    Join Date
    Feb 2012
    Location
    The Netherlands
    Posts
    52
    I expected them to sound the same, have D16R2451SL in them now but those are no longer available, so was wondering if the D8R2450SL should be a perfect replacement, I run them active, no passive filter there, but just wanted to be sure, thanks for the replies.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is There a Difference Between a Tangential 2420 and 2410 Diaphragm?
    By toddalin in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-21-2016, 04:03 PM
  2. Jbl 2226J 16ohm
    By Voice in forum Lansing Product DIY Forum
    Replies: 12
    Last Post: 10-29-2014, 03:16 PM
  3. 2405 diaphragm difference
    By neanderthal in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 06-25-2008, 08:09 PM
  4. Could someone describe the expected sonic difference between 1" and 2"?
    By scorpio in forum Lansing Product General Information
    Replies: 5
    Last Post: 08-01-2005, 06:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •