Results 1 to 3 of 3

Thread: 5way design help

  1. #1
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    815

    5way design help

    thanks,
    so iam contemplating the horn configuration on a 5way cabinet i plan to design, and id like to go with two horns
    2420/2420 & the 2440/2441.
    i see folks setting up the horn as a facet into the baffle design attaching the horn w/ some adhesives,

    can anyone give me input on using the 2307/2311 with radial horn/lens type configuration. maybe just lop of the back half of
    the radial horn to attach it flush to the front baffle & reconfiguring the internal veins.

    second what about a 2 piece 2397 type horn which can attach internally and externally. (not using the 2307/2311)

  2. #2
    Member
    Join Date
    May 2016
    Location
    virginia
    Posts
    43
    bldozier,

    The way I installed the big horn is not flexible, i.e., it will be difficult to remove the horn from the cabinet, but I
    have no ability try others. Don't laugh at me.

    1. Cut the holes on the front panel
    2. glue the horn on the front panel
    3. Install two horizontal wood boards inside the front panel to clamp the horn; also as the cabinet bracking
    4. Use homedepot roof sealing coating internally to make sure no gap between the horn and the cabine


    Regards,

    azzd

    Quote Originally Posted by bldozier View Post
    thanks,
    so iam contemplating the horn configuration on a 5way cabinet i plan to design, and id like to go with two horns
    2420/2420 & the 2440/2441.
    i see folks setting up the horn as a facet into the baffle design attaching the horn w/ some adhesives,

    can anyone give me input on using the 2307/2311 with radial horn/lens type configuration. maybe just lop of the back half of
    the radial horn to attach it flush to the front baffle & reconfiguring the internal veins.

    second what about a 2 piece 2397 type horn which can attach internally and externally. (not using the 2307/2311)

  3. #3
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    815
    Take a peek.

    Name:  IMG_0500.JPG
Views: 300
Size:  16.7 KB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Why is 4 Way design dead?
    By Brian DK in forum General Audio Discussion
    Replies: 91
    Last Post: 08-28-2019, 04:08 AM
  2. 5way recommendation
    By bldozier in forum Electronic Crossovers
    Replies: 0
    Last Post: 10-15-2017, 06:18 AM
  3. Replies: 13
    Last Post: 01-17-2016, 10:24 AM
  4. 3.5way build questions
    By golana in forum Lansing Product DIY Forum
    Replies: 3
    Last Post: 07-19-2015, 11:04 AM
  5. Box design - WinISD Help
    By sdaniel in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 12-14-2005, 12:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •