Hi everyone,

A while back I built a pair of L300's but instead of the original compression driver I used a 2441 driver with a smith horn on top. The speakers are using the modified Nelson Pass crossover and worked like a dream.
Now I wanted to challenge myself again and someone here suggested a Yuichi horn. It looked interesting and I thought I will give it a go. A lot of sawdust later I have finished them and yes they do sound better. I know the Yuichi horns can go a lot lower so I used a active crossover and yes the sweet spot seems to be around 700hz. So my question is how to modify the crossover so that the horn (2441) and the woofer (2235h) meet at about 700hz? Can this be done and how can it be done?

thank you in advance
minush