Results 1 to 4 of 4

Thread: Is This 2404H-1 Diaphragm Aftermarket?

  1. #1
    Senior Member
    Join Date
    Apr 2016
    Location
    Winnipeg Manitoba
    Posts
    236

    Is This 2404H-1 Diaphragm Aftermarket?

    I bought a couple of 2404 H1 tweeters on ebay with supposedly tested original diaphragms. One diaphragm is shattered, but the good one looks aftermarket to me.
    Attached Images Attached Images  

  2. #2
    Senior Member
    Join Date
    Jan 2005
    Location
    Detroit
    Posts
    382

    2404H-1 diaphragm

    All the original ring radiator dias. I have are brass in color. But, the most important is how it performs. The aftermarket jobs I got stuck with had sub-normal output - 10 db down or more - and response of about 10 - 12 KHz. So, if it plays OK, I'd use it. Otherwise it is a lost cause.

  3. #3
    Senior Member
    Join Date
    Oct 2003
    Location
    Texas
    Posts
    1,815
    Even if the surviving one is original (they usually have quite a bit of stuff stamped in ink around the outside), you need a new diaphragm for the other - and getting the new one and whatever this one is to play together at the same level will probably be a toss up.

    So two new diaphragms will get you going

  4. #4
    Senior Member
    Join Date
    Apr 2016
    Location
    Winnipeg Manitoba
    Posts
    236
    I opened up a pair of 2402's and the diaphragms look the same. They have the original decals on the back, so I'm assuming they are original.

    In all of the internet pictures, the diaphragms have brass rings and ink stamped on them.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Are these aftermarket 2404H diaphragms?
    By Cozmo in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 02-20-2016, 07:36 AM
  2. Best Aftermarket Diaphragm For 2404
    By andychris in forum Lansing Product DIY Forum
    Replies: 41
    Last Post: 12-22-2015, 02:38 AM
  3. Help with ID on this Atlec Aftermarket diaphragm
    By hifidoctor in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 10-06-2008, 03:04 PM
  4. HELP! with 2404H-1 replacement diaphragm 8 vs 16 ohm....
    By randy1kenobi in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 10-16-2005, 05:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •