Do any of you know if this driver is sensitive to DC from a amp via active X-over?
I am thinking og conecting a small SET Tube amp Direct to the driver,
something like in the M2.
Do you Think the driver can handel it?
Do any of you know if this driver is sensitive to DC from a amp via active X-over?
I am thinking og conecting a small SET Tube amp Direct to the driver,
something like in the M2.
Do you Think the driver can handel it?
I thought the output transformer isolated the speaker from DC in a SET amp, but in case it didn't I wouldn't want to subject the voice coil on a very expensive/impossible to get parts for driver to any DC if I could help it.
hsosdrum, there is a typo in this technical manual: the 33.3uF cap should read 3.3uF.
Maybe you still have the contacts at JBL Pro to make them correct this?
Always use a protection cap or risk a very expensive accident, all pro cabinets use them and always have just take a look at the schematics.
Rob
"I could be arguing in my spare time"
There are currently 1 users browsing this thread. (0 members and 1 guests)