Can anyone confirm the top plate thickness
of the le14h-1. .280?
xmax = 5.97mm
5.97*2= 11.94mm
.280 = 7.1mm
is the vc depth 19.1 anyone
19.1-7.1/2=5.95
Is the vc depth missing a decimal here
http://www.jblpro.com/pages/components/2235h.htm
Can anyone confirm the top plate thickness
of the le14h-1. .280?
xmax = 5.97mm
5.97*2= 11.94mm
.280 = 7.1mm
is the vc depth 19.1 anyone
19.1-7.1/2=5.95
Is the vc depth missing a decimal here
http://www.jblpro.com/pages/components/2235h.htm
The le14h shares the top plate along with a
3/4 magnet with the 2235h, 2205h, etc
(.281) tp is this correct
With the 4315 one I'm doing yes I think
I'd like to have a set of le14h's to go with the le14a
i have seen some le14a baskets reasonably
priced, the top plates on both are .280
an use 3/4" mags. So this gives me an impression
they both use the same magnets n have the
same gap. The 2205h is on
that list as well, they are sub $40.00 to date. Le14h
i have seen are priced over $350.00.
Seems more economical to build a set IMHO.
This is the gaps & depths.
Much of the information I have came
from this thread
http://www.audioheritage.org/vbullet...php/t-624.html
Voice coil length is 19 mm (0.75") Top plate for all those LE14Hś are .280" if remembering correct Voice coil is over-hung in those LE14Hś
But I dont think it is for the LE14Aś (with Alnico motor)?
http://www.audioheritage.org/vbullet...?10665-LE14H-1
In this link X-max is specified to be 8.5 mm I also found this old post from 4313B:
http://www.audioheritage.org/vbullet...ll=1#post36576
Flodstroem
Thanks
i have gotten a le14a pair already, now looking
into building le14h pair.
So to build a le14h; could I use a 2205h/2235h motor
amount a few others
Brian. ( big fire down from my apt it's been an hour
I can smell it now )
This is the rest of the thread from where I linked the 4313Bś post (maybe interesting for you because they are discussing the LE14A to get an LE14H (-1)
Whats burning near you? sounds scaring
http://www.audioheritage.org/vbullet...7-Recone-LE14A
Flodstroem
Idk there is a few developments down there and a few homes
Trucks are still passing.
I read them then I will have another look.
I'm fairly certain these are the same but
without a heads up hard to be sure
http://www.audioheritage.org/vbullet...p/t-33929.html
yes the Vc are the same, in the 2235h & le14h
does anyone know if the 2203vc is the same as the
latter depth and gap are equal
There are currently 1 users browsing this thread. (0 members and 1 guests)