Can measure this evening if no one else has the answer.Would anyone know the center to center distance between the midrange and the tweeter in the 3-way version of this speaker.
Can measure this evening if no one else has the answer.Would anyone know the center to center distance between the midrange and the tweeter in the 3-way version of this speaker.
Looks like 5 1/8" center to center. To get closer I'd have get out the calipers.
I viewed the mounting hole center values on one scale to get the above value probably within ~1/16"
George thanks for the tip on making the saddle.
Grumpy thanks for the center to center spacing.
Best Regards,
gwho
Ivica,
I looked up the sheet and there is a significant difference. 140 degrees vs 40. I assume that the lens on the midrange is supposed to increase the dispersion greater to better match the 2405. I will try to find a pair of 2405 to use in my boxes.
Thanks
gwho
Late but here they are.
If we knew what the hell we were doing, we wouldn't call it research would we.
Thanks for the pictures 1audiohack. I guess my pegs are different. You can see the white colored pegs for the speaker cover on the picture of the open hole. I want to thank everyone for the help. I am posting a couple pictures to show what they look like (although I am not finished). I am using parts that I have on hand for the project (the woofer is a AE TD15H). I cut holes and picked up a pair of 2405H for the tweeters. I was able to put in a brace to support the 2441 driver.
One odd thing about the boxes that I picked up is that the previous owner took a jig saw to the woofer opening and opened the diameter almost to the screw holes. This is why I had to go with the external mounts. Luckily the TD15h has a slightly larger diameter than a JBL 2235.
Regards
gwho
There are currently 1 users browsing this thread. (0 members and 1 guests)