JBL 2245H reconing.

[gasfan]

i hear you mate.
if i want to ship TWO 2245h to america and back it would cost at least 500 dollars.
so i have to recone it by myself.
but if the recone kit is a drop-in kit, there is no magic about it.
thats my thoughts...

greetings from snowy vienna

The difficulty with refoaming/reconing arises from not using a turntable to spin the basket while applying glue(an old cheapo audio tt works great). It's also easy to apply too much too quickly. Hobby shops carry long thin nozzles that slip on the integral ones. You can snip it off at the desired size. Very easy to ride it under the lip while spinning. Make sure to use a 30hz test tone. Perfect outcome.

[music2u]

Hi Slavko!

Are you looking for a reconing service or for parts only? If you are looking for a good address in Germany (on the continent, EU, no customs, easy shipping) I can highly recommend the guys I trust in Mannheim:

http://www.lautsprecher-manufaktur.de

https://www.youtube.com/watch?v=9OCgZCC1ZyM

Speak to them and give them my regards ("Stefan from Frankfurt")

Stefan

[Flodstroem]

can you give more infos on your S1S boxes?

http://manuals.harman.com/JBL/HOM/Te...t/S1S%20ts.pdf

[fencki]

Hi Slavko!

Are you looking for a reconing service or for parts only? If you are looking for a good address in Germany (on the continent, EU, no customs, easy shipping) I can highly recommend the guys I trust in Mannheim:

http://www.lautsprecher-manufaktur.de

https://www.youtube.com/watch?v=9OCgZCC1ZyM

Speak to them and give them my regards ("Stefan from Frankfurt")

Stefan

hi.
i am looking for the recones too.
i already asked him but he has only aftermarkert kits.
not near the quality of the original.
regards

[fencki]

http://manuals.harman.com/JBL/HOM/Te...t/S1S%20ts.pdf

thank you!
maybe my next project with the reconed drivers.

[fencki]

The difficulty with refoaming/reconing arises from not using a turntable to spin the basket while applying glue(an old cheapo audio tt works great). It's also easy to apply too much too quickly. Hobby shops carry long thin nozzles that slip on the integral ones. You can snip it off at the desired size. Very easy to ride it under the lip while spinning. Make sure to use a 30hz test tone. Perfect outcome.

i think if you study all manuals and videos you can try it by yourself.
time and patience...