Results 1 to 3 of 3

Thread: 2235H Drivers Series or Parallel

  1. #1
    Member
    Join Date
    May 2016
    Location
    virginia
    Posts
    36

    2235H Drivers Series or Parallel

    Happy New Year! With a lot of helps here and after months of preparation, I finally started to build my DIY speakers three weeks ago. So far so good. I am using two 2235Hs for the low frequency. Could anyone kindly let me know in which way JBL or Westlake use them? I am not sure whether series or parallel is better.

    Thanks a lot!

  2. #2
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    2,985
    Hello azzd!

    My 4350's are parallel for an approximate 4Ω load presented to the amp. Also my 4435's are parallel though one has a big inductor in series to make the one a very low frequency only helper.

    All the best,
    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  3. #3
    Member
    Join Date
    May 2016
    Location
    virginia
    Posts
    36

    Talking

    Hi Barry! Thanks again! I got it. I will use them parallel as well.

    BTW, the cabinets are finished around 50%. I will post some pictures here when the project done, especially the faults and lessons from a newbie.

    Best regards,

    azzd

    Quote Originally Posted by 1audiohack View Post
    Hello azzd!

    My 4350's are parallel for an approximate 4Ω load presented to the amp. Also my 4435's are parallel though one has a big inductor in series to make the one a very low frequency only helper.

    All the best,
    Barry.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 44
    Last Post: 12-09-2011, 10:45 AM
  2. FS: 2 JBL 2235H Subwoofer Drivers.
    By Goobermonkey in forum Lansing Product DIY Forum
    Replies: 4
    Last Post: 04-13-2011, 07:22 AM
  3. Series parallel wiring confirmation
    By rlsound in forum General Audio Discussion
    Replies: 20
    Last Post: 10-23-2010, 05:59 PM
  4. resistor parallel over compression drivers
    By frank23 in forum Lansing Product Technical Help
    Replies: 52
    Last Post: 09-11-2005, 03:05 PM
  5. Series vs Parallel hookup
    By stevem in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 02-05-2005, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •