Results 1 to 5 of 5

Thread: SK2-3300 As a Center Channel

  1. #1
    Member
    Join Date
    Feb 2014
    Location
    United States
    Posts
    35

    SK2-3300 As a Center Channel

    Hey everybody. Anyone have experience with the SK2-3300? I'm thinking it might make a good center channel? Opinions?
    Thanks!

  2. #2
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,743
    Short answer: yes, it should.
    Using an array 880 with SAMs and couldn't be (much) happier.

    Long answer: What would you be using them with? A pair of 9900 or 66000 would not be out of place in terms of matching timbre.
    -Could- be extreme overkill and non-optimal with other systems.

  3. #3
    Senior Member rdgrimes's Avatar
    Join Date
    Aug 2008
    Location
    New Mexico, USA
    Posts
    2,217
    I've read reports from people using them for L-C-R that were pretty positive.

  4. #4
    Member Fitero's Avatar
    Join Date
    Oct 2015
    Location
    Galicia, Spain
    Posts
    91
    My buddy uses one in his system and likes it quite a bit. They do sound a lot better in my experience when pulled out away from boundaries though.

    Since getting the K2s he has sold the left and right ones and patched up the wall where they were.
    Attached Images Attached Images  

  5. #5
    Senior Member
    Join Date
    Oct 2009
    Location
    Denmark
    Posts
    256
    I used three SK2-1000 (same drivers, but older model) for a couple of years as LCR and they are fantastic speakers. In my experience, they require more attention to sound optimal than other speakers. I have heard more succesful demos with the cheaper SAM3 speaker than the SK2 speaker. But on the other hand, when the SK2s have been calibrated properly, the SAM3s didn't have a fighting chance.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New K2 center channel SK2 3300
    By Valentin in forum Lansing Product General Information
    Replies: 9
    Last Post: 10-22-2010, 01:51 PM
  2. Opened Up the Center Channel Center Wall Today
    By toddalin in forum Lansing Product DIY Forum
    Replies: 0
    Last Post: 01-29-2008, 07:21 PM
  3. center channel
    By kartsmart in forum General Audio Discussion
    Replies: 3
    Last Post: 08-01-2006, 01:37 PM
  4. Center Channel Help
    By Audio72 in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 08-19-2005, 11:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •