Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 35

Thread: Which 18? (2269H, Aurasound, Revel or TC Sounds)

  1. #16
    Senior Member
    Join Date
    Oct 2014
    Location
    Iceland
    Posts
    140
    Where does JBL recommend cross M2 to Sub18?

  2. #17
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    824
    Quote Originally Posted by bubbleboy76 View Post
    How deep is the 2269h (preferably in centimeters)?
    I was going to try them With my 4645b cabinets, but they were too deep.

    Compared to 2258:
    Attached Images Attached Images  

  3. #18
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    824
    Quote Originally Posted by Jonas_h View Post
    Congrats! I was too lazy for DIY, so pulled the trigger on two SUB18's.
    I would have done the same except of the price. I don't think the cabinet alone is worth 3 times the price of 2269h, it really is a lot of Money, excepially With 4 of them But I might use the cabinetdimensions of sub18 but do consider a lower tuning than sub 18.

  4. #19
    Senior Member
    Join Date
    Nov 2008
    Location
    Gothenburg, Sweden
    Posts
    761
    Quote Originally Posted by baldrick View Post
    I was going to try them With my 4645b cabinets, but they were too deep.

    Compared to 2258:
    Thanks for the pic.
    Can you please measure it for me, how deep it is (approx)?

  5. #20
    Senior Member
    Join Date
    Oct 2009
    Location
    Denmark
    Posts
    256
    I agree that the cabinet is not worth the price... But it made more sense to me in the given situation.

    I am going to integrate them with the M2's (LCR) and cross over at 80hz. I have not seen any best practices from JBL regarding integration/crossover, but I follow the guidelines of ARCOS and their general configuration of Synthesis theaters. K2 S9900, Everest and all their other speakers are cross at 80hz to the S1S-EX's. I haven't heard that they would change this approach with the M2s.

  6. #21
    Senior Member Flodstroem's Avatar
    Join Date
    May 2004
    Location
    Norway
    Posts
    472
    Quote Originally Posted by bubbleboy76 View Post
    How deep is the 2269h (preferably in centimeters)?
    See page # 1 here:
    http://www.audioheritage.org/vbullet...hp?22679-2269h

    Flodstroem

  7. #22
    Senior Member
    Join Date
    Nov 2008
    Location
    Gothenburg, Sweden
    Posts
    761
    Quote Originally Posted by Jonas_h View Post
    I agree that the cabinet is not worth the price... But it made more sense to me in the given situation.

    I am going to integrate them with the M2's (LCR) and cross over at 80hz. I have not seen any best practices from JBL regarding integration/crossover, but I follow the guidelines of ARCOS and their general configuration of Synthesis theaters. K2 S9900, Everest and all their other speakers are cross at 80hz to the S1S-EX's. I haven't heard that they would change this approach with the M2s.
    Which acoustical crossover slope? linkwitz-riley 24dB/oct?

  8. #23
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by johanwholst View Post
    Where does JBL recommend cross M2 to Sub18?
    Hi,
    Interesting question, highly advertised M2, as STUDIO monitor too, with bass extension....???????? interesting result.


    regards
    ivica

  9. #24
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    824
    It's alive

    Slight modification to the 4645b boxes and it slipped in...

    First impression is quite good, quite a bit more output in the lower region than 2242/2258 what I was looking for, BUT still not the VLF that I really was hopeing for even though the Box now is tuned to aprox 18hz. I might need bigger cabinets or maybe other woofers with lower FS

  10. #25
    Senior Member
    Join Date
    Mar 2010
    Location
    Saint-Roch-de-l'Achigan
    Posts
    207
    Maybe electronic compensation? This sub doesn't bother if you have the needed power amp... or add mass to the cone...

  11. #26
    Senior Member Ed Zeppeli's Avatar
    Join Date
    Dec 2007
    Location
    Nanaimo, BC
    Posts
    609
    Quote Originally Posted by Jonas_h View Post
    I agree that the cabinet is not worth the price... But it made more sense to me in the given situation.
    Are you kidding? I'd pay the price just for those beefy looking flared ports!

    DIY Array, 2242 sub, 4408, 4208, Control 8SR, E120 Guitar cab, Control 1, LSR305.

  12. #27
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    Quote Originally Posted by baldrick View Post
    It's alive

    Slight modification to the 4645b boxes and it slipped in...

    First impression is quite good, quite a bit more output in the lower region than 2242/2258 what I was looking for, BUT still not the VLF that I really was hopeing for even though the Box now is tuned to aprox 18hz. I might need bigger cabinets or maybe other woofers with lower FS
    You'll need some electronic boost down there. Had you tune to Fb 28Hz, you would have felt more VLF as tuning a cabinet too low reduces the bottom end of the response. perhaps you can do a simulation.

  13. #28
    Senior Member baldrick's Avatar
    Join Date
    Feb 2006
    Location
    Haugesund, Norway
    Posts
    824
    Cabinet is org tuned to 25 hz, now it's 18hz just to test it out. I've also tried boosting up With DSP but it doesn't give the result I was hopeing for.

    What I compare too is my previous TC Sounds LMS 5400 which gave a lot more VLF than this do at the moment.

    Simulations shows that it should work quite well but not 100% satsified right now.

    What do you think of putting 2269 in a tapped horn?? I've no experince With this kind of Box but it might be fun... someone know how to simulate TH?

  14. #29
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,629
    Does the sub18 come with specific DSP settings?
    That would be a good start, after replicating the tuning and volume.

  15. #30
    Senior Member berga12's Avatar
    Join Date
    Jan 2016
    Location
    Italy
    Posts
    221
    Quote Originally Posted by baldrick View Post

    What do you think of putting 2269 in a tapped horn?? I've no experince With this kind of Box but it might be fun... someone know how to simulate TH?

    http://wp.volvotreter.de/projects/th-2/

    go in download and learn Hornresp.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •