Results 1 to 4 of 4

Thread: custom enclosure question 2203 mid bass

  1. #1
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    815

    custom enclosure question 2203 mid bass

    Hi thanks, happy Halloween.
    Id like to make a custom enclosure
    Le14h / le15h
    2203h
    2311 2440
    And a uhf.

    I cant locate the le14h transducer, but have access to essentially le14a baskets.
    Could I tahe a 4" vc magnet from another ferrit driver and use it with the le14a.

    Would the 2203 play well as a mid bass driver a la the 2108
    Would the 2203 need a dog box?

    I see the l150a and L222 used the le14 in such a compliment. W/o the use of a dog box
    Any help would be welcome

    Edit, I see the 4350 used the 2202 in a dogbox, was the dog boxed 4350 2202 a special cone kit. Id guess if using them in an seperate chamber te kit for the 2202 would need to be such and for the 2203 need to be a 2202 kit.

  2. #2
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,092
    Howdy!

    How much of this do you already have? LE14 anything cone kits are not available currently nor are LE15 kits, at least not from JBL.

    You will definitely want to separately small box the 12.

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  3. #3
    Senior Member
    Join Date
    Feb 2007
    Location
    Christchurch, NZ
    Posts
    1,400
    FYI, the L150 used a 128, not an Le14. Both the L150 and the L222 used a "dog box" though.

    Allan.

  4. #4
    Senior Member bldozier's Avatar
    Join Date
    Jun 2014
    Location
    mount kisco
    Posts
    815
    Sorry the 128h was used in the L150.
    I was satine either the le14 or le15.

    The advice would be use a sub enclosure for a 2202/2203a mid bass.
    Le14 or le15
    2202/2203
    2311
    Uhf

    I need room for a few tv screens in my living room. At 21" wide the area between cabinets is to narrow.
    Name:  20161031_102322.jpg
Views: 296
Size:  41.0 KB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 8 vs 16 ohm bass drivers in 4520 enclosure
    By jpsweezey in forum Lansing Product General Information
    Replies: 1
    Last Post: 12-31-2016, 11:30 PM
  2. Help with bass enclosure... Altec 620A or Onken?
    By intercity125 in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 08-31-2012, 09:20 AM
  3. DIY custom front loaded bass reflex speakers
    By lgvenable in forum Lansing Product DIY Forum
    Replies: 11
    Last Post: 03-31-2010, 02:29 AM
  4. Science of bass reflex enclosure for 604
    By rocket in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 03-26-2006, 08:04 PM
  5. Bass reflex port in early Opollo enclosure?
    By JRL in forum Lansing Product General Information
    Replies: 5
    Last Post: 07-28-2004, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •