Hey guys,
I have been a member in this forum for a couple of years now and have benefited from a lot of whisdom and help on this board.
My journey started about 10 years ago with a pair of 2470 drivers and from that moment on I had been infected with the JBL-Virus. I started collecting vintage JBL speakers and building enclosures for them. But unfortunatelly I´m not a professional, so I was depending on your advices many times.
.
This thread is dedicated to all the members that had been a big help for me over the years!
.
.
.
After all I think I owe you guys at least a report about my final build.
So I have taken the time to document this during my build by taking pictures. I will post these gradually as I´m making progress in my build.
My setup consists of the following drivers:
JBL 2405
JBL 2446 (JBL 2441 dia´s)
JBL E-145
The bass cabinet will obtain a volume of 7,5 cubic ft and be vented with 2 ducts.
The midrange horn will be a westlake copy.
Crossovers will be passive.
.
Thanks again for your sustained help over the years, I hope you will enjoy the pictures.
Reply With Quote