Results 1 to 4 of 4

Thread: JBL M2 DIY and 2 CROWN I TECH 5000HD and LYNX STUDIO AES cable

  1. #1
    Junior Member
    Join Date
    Nov 2015
    Location
    France
    Posts
    5

    JBL M2 DIY and 2 CROWN I TECH 5000HD and LYNX STUDIO AES cable

    Hello ,

    I've built a pair of M2 and bought 2 Crown i tech 5000 hd. They are no finished yet , but they sound very well.

    I've also have a Pc with a soundcard , a Lynx Studio 2b with a AES cable .

    I don't know how to go, how to link the Aes cable to the 2 amps ?

    Could you help me ?

    Regards , Vincent.

  2. #2
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    Paris, France
    Posts
    2,546
    Hi Vincent, and welcome on the forum

    There is an AES/EBU through connector on the amp, so you simply need to go from your soundcard to one unit, and then from that unit to the second one.

    Regarding your clones, if they are not dimensionally 100% accurate you might have to tweak the high Q EQ points around 200Hz, or simply remove them.

  3. #3
    Junior Member
    Join Date
    Nov 2015
    Location
    France
    Posts
    5
    Ok thanks , i will do this with a Vovox AES cable.

    Also thanks for the advice for the Eq.

    Merci compatriote.

  4. #4
    Junior Member
    Join Date
    Nov 2015
    Location
    France
    Posts
    5
    This is what i've done :

    Linked the 2 amps with a Vovox AES cable

    On the first amp : Advanced Menu , AES 1

    On the second amp : Advanced Menu , AES 2

    The sound is very good, i can bypass my Theta Casablanca iii hd .

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Crown I-tech madness
    By baldrick in forum General Audio Discussion
    Replies: 16
    Last Post: 02-14-2012, 09:01 PM
  2. crown Com-Tech 800
    By lastcowboy39 in forum General Audio Discussion
    Replies: 2
    Last Post: 01-18-2011, 09:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •