I just came in to look at the forum from a few glasses of Pinot and listening to some boogie woogie and blues, yep a little fruit of the vine and some 4 way is nice
I just came in to look at the forum from a few glasses of Pinot and listening to some boogie woogie and blues, yep a little fruit of the vine and some 4 way is nice
im drunk....
Semper Fidelis
lazy weekend, didnt do anything....
i will probably paint the inside, front and rear panel tomorrow...
then start drilling the holes to hold the front baffle...
Semper Fidelis
Original 4343 have no bracing to connect front panel to back panel? I would add a couple of "column".
yeah I thought about that, I might add some kinda bracing in the middle..
Semper Fidelis
Krunchy...i cant wait!!! almost there....
crossver i think will take a while...
just mounted the front baffle.... I ended up using T nuts... i have them in stock!! why not...
GO PACK GO!!!!!!!!!!!!!!!!!!!!
Semper Fidelis
yup i got bored and did some painting....of course the front baffle will be blue
Semper Fidelis
veneer is next i think
Semper Fidelis
got an egg shell finish with a rough roller finish from lowes
Semper Fidelis
anyone here got some leftover fiberglass yellow/pink whatever....(insulation?)
any suggestions?
Semper Fidelis
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
i have....how thick is it? do i just peel it to the thickness i want? i thought those are too thick?
i guess ill use that....
Semper Fidelis
They are too thick and also shed. Look for 1" non-backed ducting insulation.
You can search the forum for Wrapon or Wrap-on.
Widget
What's shown is probably for 6-inch stud walls on 16-inch centers. You can find it it different thicknesses for 2x4 studs or larger blanket rolls for attic insulation. I like the open aspect of the roll rather than the closed-face of others. I always felt the main reason for insulation blankets in speakers was to effectively increase the volume of the enclosure through the insulation. Seems to me a more rigid blanket defeats the purpose. Plus, what I've always used matched what was already in the C37 factory cabinets, so I figured that should work best.
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
There are currently 1 users browsing this thread. (0 members and 1 guests)