JBL 4343 build.....

[ARMED]

Ivica, he said they're far enough apart, that coupling is not going to happen. Anything farther than 2", and the magnetic fields have fallen off to such a small level (it's a function of the SQUARE of the distance- twice as far, one fourth the magnetic strength- so a small increase in distance makes a big difference in less magnetic field strength) that they won't have a measurable effect, this is what he told me, thanks for the input ivica

[berga12]

HI, also in my opinion Coils are Far enough to prevent mutual coupling, so don't worry.

the "90°" rotation rules is used when the coils are really close each other (less than 1-1,5cm).

In general If I can, I use always 90°rules, Just as a safety excess.

ciao

[ARMED]

yea....its done, ill keep it that way..

i wonder if these would look ok for the Lpads, i cant find the ones with the dot and the line in the middle or the originals

https://www.amazon.com/gp/product/B0...A1THAZDOWP300U

[ARMED]

i still have to make the mounting plate for the Lpads and the thin plate for the foilcals....

ill do that monday...

[ARMED]

im still thinking where to mount it..

[berga12]

Bottom of the box? and you put on top few more layer for preventing vibration, use some silicon between and below caps.

I decided for external mount, but I also don't use variable L-pad.

[ARMED]

so i got a olympic one brand, vivid blue color from lowes.. i kinda didnt like the blue mix from that one thread (info thread)..

[ARMED]

so i started drinking, got drunk and got bored...i stained the plywood with minwax special walnut..








i put about 2 coats..then i ran out...

[ARMED]

i kept drinking and started painting the front baffle with vivid blue from lowes

2 coats...






it looks a little bright when wet...its a little flat when it dries...
and the sun is shining directly to it..

[ARMED]

i kept drinking until it dried...
and there i was!!!

i still have to paint the inside lip blue....and cover the screws with a wood filler...
for now...

i will veneer it soon!!!!!! just waiting for the right time...and still watching youtube on how to do it...

[ARMED]

will work on the ports and insulation this weekend..

[berga12]

Are you sure that you'll be able to glue the veener on the treated (minwax?) playwood? check that prior to start...

[ARMED]

yah... its a stain...its not like a coat of paint...

[NWCgrad]

Any movement in the build?

[ARMED]

yes!!!!!!!!!!!!! been busy my bad...life...kids...work...stuff