LE14H-3

[sourceoneaudio]

For everyones information. As of yesterday the LE14H-3 became available from JBL.
part number 336321-001 Woofer $279.93 1/23/2007This is the woofer that comes in the 1400 ARRAY BG Same driver as the LE14H-1 parameters run on each speakers are almost identical. The LE14H-3 is down 1db on output. other than that they are identical. The -3 driver has a rubber surround so no more re-foaming/rotting>>>>>>>>>>>>>>>.

Put these in your 250TI's and enjoy the music.

J/S-S1A

http://www.harmanaudio.com/search_br...0%20ARRAY%20BG

[Andyoz]

Thanks for posting that.

[sourceoneaudio]

Also the Mid Tweet Horn Array is available. Very cool item.


Part no: 339009-001 TWT UHF-045TI 1400 ARRAY(N 361016-001) $324.85

J/S-S1A

[4313B]

For everyones information. As of yesterday the LE14H-3 became available from JBL.
part number 336321-001 Woofer $279.93 1/23/2007This is the woofer that comes in the 1400 ARRAY BG Same driver as the LE14H-1 parameters run on each speakers are almost identical. The LE14H-3 is down 1db on output. other than that they are identical. The -3 driver has a rubber surround so no more re-foaming/rotting>>>>>>>>>>>>>>>.

Put these in your 250TI's and enjoy the music.

J/S-S1A

Thanks. We know. We asked JBL to run this several years ago and they graciously agreed. The EDS for both have been posted in the Transducer Section.

[John W]

Also the Mid Tweet Horn Array is available. Very cool item.
Part no: 339009-001 TWT UHF-045TI 1400 ARRAY(N 361016-001) $324.85

Isn't this just the UHF tweeter?

[4313B]

Isn't this just the UHF tweeter?

Yes.

361016-001 is the 045Ti-1 which is aquaplased.
339009-001 is the 045Ti which is not aquaplased.

And then you have to find a horn for it.
Heck, you could build a nice horn John!

[sourceoneaudio]

They are attached.



http://www.jbl.com/home/products/pro...at=BFS&ser=PTS

J/S-S1A

[John W]

Yes.

361016-001 is the 045Ti-1 which is aquaplased.
339009-001 is the 045Ti which is not aquaplased.

And then you have to find a horn for it.
Heck, you could build a nice horn John!

I'm thinking TOTL 2-way

The LE14H-3 was on my list, but are there sources for 1500AL, 1500FE, or 1200FE woofers also.

[4313B]

I'm thinking TOTL 2-way

The LE14H-3 was on my list, but are there sources for 1500AL, 1500FE, or 1200FE woofers also?

Yes.

[Andyoz]

To make sure I am reading this thread correctly, are we agreed that the LE14H-3 is a suitable substitution for the LE14H-1?

Looking at the plot above, there is nothing much between the 2 drivers over the operating range as used in the 250Ti. Are there any issues with the crossover network to consider?

I may need to use this option in the future

[4313B]

It's quite close for a 250Ti. A 240Ti might require a network tweak.

[Andyoz]

Yes, great.

If only there was a 044Ti substitute as well...........

[dino]

hello. I have a pair of L-250 will the le 14-h3 work or will I need to adjust the xover

[sourceoneaudio]

To match the output so the speaker is uniform from the woofer to the tweeter is to drop the buss bars down one notch on each driver. The output loss of 1db using the LE14H-3 is due to the moving mass going up .3 of an ounce if I'm correct due to the rubber surround. Hope this helps.
And yes you can put those drivers into L250's, 240TI's & 250TI's, as a replacement and have many years of no foam rotting happiness.

J/S-S1A

[Thom]

Would the surround, should there be a source, interchange?