Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: 2216nd-1 available

  1. #1
    Senior Member Kalle's Avatar
    Join Date
    Jul 2013
    Location
    Sweden
    Posts
    124

    2216nd-1 available

    Interesting for in style of 4367 But I guess the 4367-Wg never will be possible to buy.

    http://reconingspeakers.com/product/...-320-0045-002/

    I stick to my DIY M2 personally

    /Karl

  2. #2
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Quote Originally Posted by Kalle View Post
    I stick to my DIY M2 personally
    No loss there.
    I do find it very interesting that JBL is allowing these parts to be sold. They have certainly oscillated on their policy recently.

  3. #3
    Senior Member srm51555's Avatar
    Join Date
    May 2013
    Location
    Wisconsin
    Posts
    622
    Quote Originally Posted by 4313B View Post
    No loss there.
    I do find it very interesting that JBL is allowing these parts to be sold. They have certainly oscillated on their policy recently.
    For us this is great, it breathes new life into the forum.

  4. #4
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,627
    I would be curious to see the T/S parameters of this -1 version, or better still a full-blown EDS !

  5. #5
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,092
    Bummer that part number does not show up on the pro side of JBL parts.

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  6. #6
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by pos View Post
    I would be curious to see the T/S parameters of this -1 version, or better still a full-blown EDS !
    Hi POS,

    Have You seen 2216nd-1 T/S ?
    Pls, show us if YES

    Regards
    ivica

  7. #7
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,627
    Hi Ivica
    Unfortunately I have not

  8. #8
    Member
    Join Date
    Dec 2008
    Location
    Serbia
    Posts
    52

    Free air impedance

    I visited my friend and we did measure 2216nd-1. I am posting results.
    Attached Images Attached Images  

  9. #9
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by zeljkor View Post
    I visited my friend and we did measure 2216nd-1. I am posting results.
    Hi zeljkor,

    Nice to be seen, but please, send us full recalculated T/S data, so can be used for the projects....

    Regards
    Ivica

  10. #10
    Member
    Join Date
    Dec 2008
    Location
    Serbia
    Posts
    52
    T/S data measured from the first driver:
    Re = 5.556Ohm
    Fs = 28.26Hz
    Qts = 0.376
    Qes = 0.397
    Qms = 7.12
    Le = 0.461mH
    Mms=134.1gr
    Vas = 332.8liters

    T/S data measured from the second driver:
    Re = 5.52Ohm
    Fs = 27.59Hz
    Qts = 0.3572
    Qes = 0.3776
    Qms = 6.589
    Le = 0.4703mH
    Mms=123.8gr
    Vas = 378.4liters

    I am not sure how much my data is different from factory specs since they are not available.



    Quote Originally Posted by ivica View Post
    Hi zeljkor,

    Nice to be seen, but please, send us full recalculated T/S data, so can be used for the projects....

    Regards
    Ivica

  11. #11
    Guest
    Join Date
    Dec 2009
    Posts
    0
    Quote Originally Posted by zeljkor View Post
    T/S data measured from the first driver:
    Re = 5.556Ohm
    Fs = 28.26Hz
    Qts = 0.376
    Qes = 0.397
    Qms = 7.12
    Le = 0.461mH
    Mms=134.1gr
    Vas = 332.8liters

    T/S data measured from the second driver:
    Re = 5.52Ohm
    Fs = 27.59Hz
    Qts = 0.3572
    Qes = 0.3776
    Qms = 6.589
    Le = 0.4703mH
    Mms=123.8gr
    Vas = 378.4liters

    I am not sure how much my data is different from factory specs since they are not available.
    Nice to see some T/S data for this woofer
    but why is so much different in Mms between both woofers, thatīs strange?


    Ari

  12. #12
    Member
    Join Date
    Dec 2008
    Location
    Serbia
    Posts
    52
    Driver with lower fs was working around 2 hours in free air (20Hz , 3V applied). I suppose this influenced measured data. The second one was "cold".

  13. #13
    Senior Member
    Join Date
    Feb 2008
    Location
    Ashland, MA
    Posts
    908
    because MMS is calculated from the impedance sweep, deviations in measurement could influence the calculation. Big difference but may not reflect a real difference of ~10g.

  14. #14
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,627
    Thank you zeljkor!
    Interesting, this thing seems to behave similar to a 2245H

  15. #15
    Senior Member ivica's Avatar
    Join Date
    Jan 2008
    Location
    serbia
    Posts
    1,703
    Quote Originally Posted by pos View Post
    Thank you zeljkor! Interesting, this thing seems to behave similar to a 2245H
    Hi Pos, 2245 vs 2216nd-1 Similars ???!??? Regards Ivica

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2216Nd Projects
    By 4313B in forum Lansing Product DIY Forum
    Replies: 52
    Last Post: 03-06-2024, 01:40 PM
  2. 2216Nd vs 2265
    By Bruno_du_13 in forum Lansing Product General Information
    Replies: 6
    Last Post: 09-03-2015, 03:35 AM
  3. 2216Nd
    By Techbot in forum Transducer Information
    Replies: 3
    Last Post: 10-19-2012, 08:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •