My 4351 Build

[quindecima]

There is a Walnut trim that is attached. right angled with two 1/8 indents and angled from there.

[focalguy]

A thousand thanks, now on to the veneer I'm thinking about using titebond instead of contact, any input on that?

Use the titebond.... the contact will fail in a few years after a the temp. cycles. I use titebond III... its the best you can buy.

and this is how your living room will look like soon! I sneaked them in when my wife wasnt home...needed a refrigerator dolly!

[ARMED]

There is a Walnut trim that is attached. right angled with two 1/8 indents and angled from there.

thanks man, im about to start my 4333b build, did you staple it? or just plain glue

[quindecima]

NO staples, I use Titebond and a brad nailer

[quindecima]

I don't know why the one looks like it has dark spots in the pic, must be a shadow.

[focalguy]

I don't know why the one looks like it has dark spots in the pic, must be a shadow.

Looks great.... dont forget the cross brace between the 15 inch drivers, from baffle to back panel.

[quindecima]

Looks great.... dont forget the cross brace between the 15 inch drivers, from baffle to back panel.

Thanks for the heads up on that.

[quindecima]

Grills are done, they are the hardest part of the build. 6 hours to make them. I didn't make them in an upper or lower although they do look better that way. I did them like my 4345's. This isn't a JBL clone so I decided to take some license, notice the 2202 is not lined up with the upper 2235 although in retrospect I do believe it looks better that way but these are going to look fine like they are. So close to being done just need the networks and the grill cloth.

[quindecima]

Foilcals are made and installed and I have the Cork cutouts for the speakers. Sorry about the dust.........SOON

[quindecima]

Grills covered

[1audiohack]

Those are gorgeous! Very good work!

Barry.

[quindecima]

Tnx Barry, soon those 2202's I got from you will be performing some good tunes.

[focalguy]

Just wanted to share my new page showcasing my builds from the last few years and welcome comments.. Please watch the videos too!
https://www.facebook.com/KangSound-1252894348055546/

[quindecima]

Thanks I looked at them very, very nice work my congrats to you for the fine job you did.

[quindecima]

I thought I would attach these for a little bling.