Results 1 to 15 of 34

Thread: Urei Theater - Rebirth of Relyea Cinema 1

Hybrid View

  1. #1
    Senior Member UreiCollector's Avatar
    Join Date
    Dec 2005
    Location
    NY. USA.
    Posts
    218

    Urei Theater - Rebirth of Relyea Cinema 1

    Hello again everyone. I'm once again under construction here, rebuilding the theater in my new home.

    This new theater will be in the family room (no longer confined to the basement!). The room has an existing brick fireplace, which I had considered removing, but it would only buy me 8 inches of depth in the room, and dad convinced me that down the road, having this tucked away may help sell the house...and leaving it there is a WHOLE LOT easier.

    The new room brings some new challenges with light control (bay window, back door, and adjacent kitchen), but some advantages (open windows=music on the patio, spillover seating in the kitchen, and the space for 2 rows of seating).

    Here's the latest plan for the room...I will be going down to a 2 column equipment rack, and locating the amplifiers in the garage...heat management will be a whole lot easier, and I don't need to dress up all the amplifiers with nice face plates, and best of all I'll be able to keep the wire runs to the speakers very short. Unfortunately, with the limitations of the room, my rear channels can no longer be UREI's, I just don't have the space...so I'll be custom building back channels this time around.
    Name:  relyeaCinema1_v3.jpg
Views: 807
Size:  37.5 KB

    Name:  theaterFront.jpg
Views: 755
Size:  30.8 KB

    Construction is underway. I've already framed the front wall, half wall, and most of the riser. I decided to go with 2x6 for the front wall this time...stronger can't hurt.
    Name:  frontFraming.jpg
Views: 746
Size:  60.0 KB

    I also have room this time around for two rows of seating. I realized that there would be considerable volume in the riser, so figured why not let it double as a sub-woofer cabinet as well. This will only be used to augment the main sub-woofers in the front of the room, I'm suspecting I'll need to compromise on the level due to the tactile effect we experience from sitting on top of this "cabinet".
    Name:  riserConcept.jpg
Views: 790
Size:  55.5 KB
    Name:  riserFramed.jpg
Views: 804
Size:  41.5 KB

    I'll keep you all posted on the progress, I'm very excited about getting this room back together.
    Last edited by UreiCollector; 05-15-2016 at 07:07 PM. Reason: corrected typo
    Frederick "The Urei Collector"

  2. #2
    Heather [Senorita member] hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,341
    Absolutely!! Tho I am just a small UREI collector,
    I look forward to your progress and images of
    this new design and build eagerly!
    Rock on Indeed!
    2ch: Oppo, JoLida 502CRC, JBL L212, 18ti,240ti; Heath AS101, Von Schweikert VR4
    7.1: Oppo BDP103D, B&K, UREI 809A, JBL B460

  3. #3
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    2,702
    Can't wait to see how this turns out!

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  4. #4
    Senior Member srm51555's Avatar
    Join Date
    May 2013
    Location
    Wisconsin
    Posts
    502

  5. #5
    Senior Member UreiCollector's Avatar
    Join Date
    Dec 2005
    Location
    NY. USA.
    Posts
    218
    So a few plan changes here at Relyea Cinema 1. My new bride made the executive decision that we will move the back door from the theater into the kitchen. We are expanding the riser into that corner, and will be able to have a full size couch in the back row, and an end-table.

    While a little more work, it will make for a much nicer finished product, and reduces the ambient light issue. Beyond that, with our wedding out of the way, I have time to focus on finishing the room! As soon as the door arrives, we will be installing that, and finishing the riser...and I should have all other framing finished by then, so we will be able to move onto sheetrock.

    Finally moved the UREI's from the warehouse, so the pressure is really on...they are taking up a lot of space in the dining and living room!
    Name:  ureisHome.jpg
Views: 631
Size:  57.6 KB
    Last edited by UreiCollector; 07-05-2016 at 10:16 AM. Reason: fixing terrible verbage
    Frederick "The Urei Collector"

  6. #6
    Senior Member UreiCollector's Avatar
    Join Date
    Dec 2005
    Location
    NY. USA.
    Posts
    218
    This weekend a friend called with a lead on a JBL 3635 theater subwoofer. After a few quick texts and a short drive, I parted with $250, and secured what will become the center sub for Relyea Cinema 1. This saves me from having to fabricate a complete cabinet...i'll just add a new baffle to dress this up, and a grille. This will bring the low end compliment to 2x 2242H, 1x 2042H, 2x 2215H. I shouldn't be lacking for LF extension.
    Name:  IMAG3288.jpg
Views: 719
Size:  345.7 KB
    Frederick "The Urei Collector"

  7. #7
    Senior Member UreiCollector's Avatar
    Join Date
    Dec 2005
    Location
    NY. USA.
    Posts
    218
    Here's the new riser plan.
    Name:  newRiserRC1.jpg
Views: 620
Size:  47.6 KB
    Frederick "The Urei Collector"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Urei Theater
    By UreiCollector in forum Miscellaneous Gear
    Replies: 105
    Last Post: 04-03-2015, 06:33 AM
  2. McIntosh MC240 rebirth
    By Wardsweb in forum General Audio Discussion
    Replies: 34
    Last Post: 08-22-2014, 07:05 AM
  3. Rebirth of a JBL K120
    By edgewound in forum Lansing Product Technical Help
    Replies: 22
    Last Post: 04-16-2011, 02:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •