I've quite recently made a second hand purchase for a pair of TI 5000 speakers, knowing in advance that some repair of the speakers was needed.

The previous owner has been tampering with the high pass cross over section, and both 050TI tweeters has been damaged in the process. I would very much like to bring the cross over back to the original condition, and verify if only one, or both 050TI's is blown to pieces.

Could anyone help me with a schematic for the cross over board in the TI 5000, or just the section for the 050TI tweeter. Mid and Low section seems to be the original parts.

I also need information about DCR for the 050TI tweeter. One tweeter measure 2.4 Ohm and the other is completely open.

Any information about this would be highly appreciated.

Regards
Hans