Results 1 to 11 of 11

Thread: TI 5000 high pass problems

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    fast2night
    Guest

    TI 5000 high pass problems

    I've quite recently made a second hand purchase for a pair of TI 5000 speakers, knowing in advance that some repair of the speakers was needed.

    The previous owner has been tampering with the high pass cross over section, and both 050TI tweeters has been damaged in the process. I would very much like to bring the cross over back to the original condition, and verify if only one, or both 050TI's is blown to pieces.

    Could anyone help me with a schematic for the cross over board in the TI 5000, or just the section for the 050TI tweeter. Mid and Low section seems to be the original parts.

    I also need information about DCR for the 050TI tweeter. One tweeter measure 2.4 Ohm and the other is completely open.

    Any information about this would be highly appreciated.

    Regards
    Hans

  2. #2
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Ti5000
    Attached Images Attached Images

  3. #3
    fast2night
    Guest
    Quote Originally Posted by Giskard
    Ti5000
    Thank You very much for the attached document.

    All problems solved.

    Regards
    Hans

  4. #4
    Junior Member
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    9
    Hi.
    I also bought a pair of TI5000 recently. They are in perfect shape, but of course I had to look inside .
    The crossover seems not to be the one pictured in the technical manual linked above. Unfortunately no manual can be downloaded from the Harman website.

    My crossover has the designation "TI5000G" on it and the part number is 270511. The boxes serial number is also ending with a "G". They were purchased in Germany and are made in Denmark.

    There are a lot of rumors about different versions of the TI5000 on the net, but I didn't find any facts. Anyway the crossover doesn't look cheaper than the one in the posted ts. It even has more parts and polypropylene caps for the tweeter.
    Does anybody have a technical manual for this version or know more about it?

    Thanks,
    chuck.


    Name:  NTI5000G.jpg
Views: 8099
Size:  260.6 KB

  5. #5
    Senior Member timc's Avatar
    Join Date
    Oct 2006
    Location
    Norway
    Posts
    953
    Thats a neat little crossover you got there

    Cant help you with technical details I'm afraid.


    -Tim

  6. #6
    Junior Member
    Join Date
    Feb 2006
    Location
    Germany
    Posts
    9
    Hi Tim,
    yes it's quite impressive. Considerably bigger than an A4 sheet.

    I just called the German JBL service, they know about the TI5000G version, but they don't have any datasheets. However, the network 270511 is available as a spare part for just around 600 Euros

    On the net I only found the less interesting half of the datasheet.

    JBL_Speaker_Ti5000G.pdf

    I'm still interested in the schematic

    Thanks,
    chuck.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL Performance Series
    By Titanium Dome in forum Lansing Product General Information
    Replies: 2132
    Last Post: 06-08-2022, 12:37 PM
  2. 4435 choke values
    By Guido in forum Lansing Product Technical Help
    Replies: 15
    Last Post: 03-09-2019, 06:48 AM
  3. M552/3 high pass freq.
    By Alex Lancaster in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 03-12-2004, 08:20 PM
  4. 5235 Network Plug-In Card 52-5130
    By Ralf in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 11-15-2003, 03:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •