Results 1 to 6 of 6

Thread: Badge placement

  1. #1
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,619

    Badge placement

    on the JBL replacement cloth grille inserts for the L100

    I have seen them stuck all over the place

    Would greatly appreciate the exact placement measurements for the corner on an original unmolested example

    (unless of course there was no such thing and left uo to the end user)

    Thank you if you can help; I'd be very much interested in knowing the placement measurements on the original Quadrex foam types as well (but only if taken from an original or an exact reproduction)

    Thank you

    Thoams

  2. #2
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    6,964
    Quote Originally Posted by Wagner View Post
    Thank you if you can help; I'd be very much interested in knowing the placement measurements on the original Quadrex foam types as well (but only if taken from an original or an exact reproduction)
    Measurement? Seems to be one-up, and one-over?

    ". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers

  3. #3
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,619
    Quote Originally Posted by BMWCCA View Post
    Measurement? Seems to be one-up, and one-over?
    Seems you are incorrect, try taking a closer look

    Guess you don't know either

    What's it with you and L100 threads anyway?

    Irresistible force?

  4. #4
    Member 300_Summit's Avatar
    Join Date
    Oct 2015
    Location
    Chicago
    Posts
    64
    Thomas, looking at the catalogs, it looks like early L-100s had the badges in the lower left corner (2nd pic). In the 1976 catalog (1st pic) JBL moved the badges to the top right corner. Hope this helps.

    Lamont






  5. #5
    Senior Member Ian Mackenzie's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,127
    Wagner,

    You struck out again boy.

    300 Summit nailed it.

    Suggest you lay low and left folks consider and comment on the community interest before you decide your the only one alive after D Day.

  6. #6
    Senior Member
    Join Date
    May 2009
    Location
    California
    Posts
    1,619
    Quote Originally Posted by 300_Summit View Post
    Thomas, looking at the catalogs, it looks like early L-100s had the badges in the lower left corner (2nd pic). In the 1976 catalog (1st pic) JBL moved the badges to the top right corner. Hope this helps.

    Lamont
    Yes. I have noticed that as well on some examples, thank you for that Lamont

    My primary interest is getting the distance from for vertical and horizontal insert edge right

    Foam inserts would make life so much simpler, but after the effort to make the ones I have (inserts) and that they are covered with some of the material from the last order I did with Evan (and a little of his cat's DNA to boot), then cloth it is

    That is why I am being so fastidious with something so irrelevant, these have a little of the "Zilch vibe" in them and I want the accurate measurements.............................I hear what you are pointing out; I want to go with the most common "bottom" placement, meaning nearest the woofers

    Thank you Sir

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What does the JBL badge look like on your JBL speakers?
    By JBL 4645 in forum General Audio Discussion
    Replies: 5
    Last Post: 01-01-2011, 12:08 PM
  2. JBL badge
    By 2string in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 01-16-2010, 07:51 AM
  3. jbl//badge-engineering
    By demon in forum Lansing Product General Information
    Replies: 6
    Last Post: 12-08-2008, 11:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •