Results 1 to 5 of 5

Thread: 2397 Smithhorn help

  1. #1
    Steve Gonzales
    Guest

    2397 Smithhorn help

    I hope you all had a wonderful Thanksgiving!

    I would like to fulfill my dream of building some copies of 2397's or Westlake horns for use with 2441's-etc. Does anyone have knowledge of where to begin? blueprints? I have access to a fully equipped woodworking shop. After seeing Eckhard's cool stack,well, I'm inspired!. I saw some walnut horns on ebay that are inspired by Altec 511b's to further fuel the fire. After looking at the pictures of my Bud's set-up with 2435HPL's, I realized: NOT ALL HORNS ARE CREATED EQUAL and although he likes his, they do seem a little clunky when compared to JBL and Westlakes. I see that the vains don't look as refined and they are beautiful but crude in design. I realize that it is complicated for sure but I believe I can manage to get a good result with the correct information. Any tips would be greatly appreciated! Thank you.


  2. #2
    Senior Member gerard's Avatar
    Join Date
    Sep 2004
    Location
    Casablanca - Morocco
    Posts
    333
    hello


    I have the same project too and I have complete plan to make a copy .
    if you search on 2397 horn you will see Mr widget is more than an expert and send also a 3d drawing to make the throat adaptor if you don't have any .
    I will make them in the next months in plywood or mdf with an oak finishing ; there should be about 2-3 cm thick on each side .I believe i will have to build a special support to prevent the throat adapter to the horn and my 2420 to break ! .

    If you need the plan i can mail it to you but I am sure the "expert "on this forum should have better than I have ! .

    regards

    Gerard

  3. #3
    Steve Gonzales
    Guest

    2420?

    Hi Gerard,


    I think i read/heard that the 2397 is really suited for 2" throat, large format drivers. Something about the throat pressure? Anyways, thank you for your response and i will do a search on the subject (should have known better!). Good Luck with your project! TTYL, Steve G

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,939
    Try these:

    http://www.lansingheritage.org/html/...-comp/2397.htm
    http://audioheritage.org/vbulletin/s...?searchid=5161
    http://audioheritage.org/vbulletin/s...?searchid=5165

    I thought I had posted a more complete drawing of the 2397, but I can't seem to find it in my searches. Here is a reduced size drawing that will fit the forum.

    Widget
    Attached Images Attached Images  

  5. #5
    Steve Gonzales
    Guest

    You are so Gracious

    Thank you Mr Widget!!!!!. I am going to do a sample run on one soon. thank you and Happy Holidays, Steve G


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL 2397 Curves
    By Mr. Widget in forum Lansing Product General Information
    Replies: 80
    Last Post: 09-20-2015, 12:07 PM
  2. 2397 horn - varnish and adapter
    By gerard in forum Lansing Product Technical Help
    Replies: 36
    Last Post: 02-01-2006, 04:44 AM
  3. Dimensions for 2397 or TH 4001?
    By scorpio in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 08-22-2004, 08:53 AM
  4. 2397 Wood Horn
    By Chas in forum Lansing Product General Information
    Replies: 26
    Last Post: 04-28-2004, 04:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •