Originally Posted by Challenger604
Thanks!!!! that sound great!
Thanks!!!! that sound great!
Grills are going to be finish soon!!!!
than, driver and first switch on!!!! I'm in delay with crossover card for my 5235, i will use an Alto mobile temporary untill I finish the PCB's!
Grills are going to be finish soon!!!!
than, driver and first switch on!!!! I'm in delay with crossover card for my 5235, i will use an Alto mobile temporary untill I finish the PCB's!
Very nice! Hang in there Luca!
Small progress....this weekend I should mount the drivers and make the first trial!
Those look great!
Barry.
If we knew what the hell we were doing, we wouldn't call it research would we.
That makes me want to begin my grills!!I'm sure you will be a bit emotional when you gonna hear some sound coming out of it!They are a very big project...Congrat!Cheers!
Widget
Mid high complete, and done some cabling on crossover network.....road to the "end"
Velcro is 3M type, so sticky that I don't need to put staplets! a bit wider than the original progect, this is 1", but it looks fine and keep what he need to keep!
Gold finishing on black is nice, still need to change screw on the 2441 and paint them in black, then place the foilcal that a friend provide me, but this is just final "makeup", now I'm fighting with the Vents for the 2226h and prepare vents for 2235h!
Mid high complete, and done some cabling on crossover network.....road to the "end"
Velcro is 3M type, so sticky that I don't need to put staplets! a bit wider than the original progect, this is 1", but it looks fine and keep what he need to keep!
Gold finishing on black is nice, still need to change screw on the 2441 and paint them in black, then place the foilcal that a friend provide me, but this is just final "makeup", now I'm fighting with the Vents for the 2226h and prepare vents for 2235h!
Hi Luca,
Very nice!
I didn't stapled the velcro at the begining. But after awhile they gonna detached very slowly by themself and you might found your lenses on the floor broken... I would cut it to the width and staple it.
Did you place some cork gasket around the 2202?
C
Ciao,
I didn't found the right "rubber cork" to my need at the shop, and the only Cork I found was really instable and fragile.
For the time being I used a 1cm x 3mm Neoprene that gave me a nice fitting, I hope to do not have to dismount the driver so often, if I will find the right cork I can substitute the Neoprene.
You should be fine with that too.
those are nice grills! im gonna make one myself for my barzilay box and get rid of the lattice grill!
Semper Fidelis
My crossover is also finish, I need to cut a nice Plexyglass Panel
I left space for eventual:
- Auto transformer for 2441
- Passive high pass for 2202h
- Passive low pass for Woofers
- space for passive biamp connector and woofer exit
Just in case I would like to try something different and speriment.
Starting design will be as the project request.
I would use Solen components if I was you. Top of the top and very good looking...My crossover is also finish, I need to cut a nice Plexyglass Panel
I left space for eventual:
- Auto transformer for 2441
- Passive high pass for 2202h
- Passive low pass for Woofers
- space for passive biamp connector and woofer exit
Just in case I would like to try something different and speriment.
Starting design will be as the project request.
Sorry, but I don't Agree, Solen are fine, but those are Mundorf (one Jantzen) and some Russian Cap, Far away better than Solen.
Just look their website and variety of product and price they have.
beside that, that could be a personal choice, I had nearly 70% of the crossover components at home, so it make no sense to spend additional 300-400€ for Solen that it's even not better.
Solen is a good component with good price/quality compromise, Mundorf,Jantzen,Obligato,Hammond etc etc etc are State of the Art.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
