So here are the before and after shots of my 2203Hs I thought were shot. Seriously collapsed spiders. I got in touch with Ken who informed me the only real remedy is to replace them along with the caps; removal of the mass rings, etc. So I thought I may as well give it a try...support the cones and dab acetone on the spiders. I did this 3 times, letting them dry and checking in between by removing the support. Close but no cigar. 2 more times using a blow dryer on high to dry them. Success! It worked perfectly. The cone doesn't pop back and forth past center as a stretched spider would indicate. They did so before. They are now nice and bouncy, slight collapse of the spiders in either direction from the weight of the cone(no foams installed). I'm ecstatic to say the least