Project M2 DIY Thread

[Flodstroem]

I started working on a DCX2496 version of the correction settings, just for the fun of it.
So far I got reasonably close (especially considering the fact that there is no 36dB/oct filters, and you cannot chain them...) but I still need to spend some more time on it to make it closer.
Is there an interest here for such a thing?

Hi POS
Sounds very interesting. Though I also own 2 DCX2496 it would be nice if I could use one of those for my M2 clone project. Im interested to take advantage of your findings regarding using this crossover for an M2 type of speaker

[pos]

Here is the dedicated thread: http://www.audioheritage.org/vbullet...X2496-settings

[Flodstroem]

Thanks POS Its appreciated really

[sebackman]

Look what the mailman brought.

Have a nice weekend

//RoB

[srm51555]

Nice!

[ggetzoff]

Any mounting adapters out there. I would really like a pair!

Cheers,

Greg

[ggetzoff]

Dear all

Logos as per the picture are 5 Euros each plus cost of letter shipping to where ever you are.

And yes, they fit perfect in the M2 WG as they are 30mm x 30mm. :-) . About 3mm thick

I also found two pairs of M2 adapters in the shop that I had forgotten :-) . 50 Euros per adapter + shipping.

These fit all 1,5" JBL drivers, dual bolt patterns. They are made in Aircraft alu so they are reasonable light to keep shipping cost down.

Merry Christmas

//Rob

ill take the adapters!!!!

[Flodstroem]

Look what the mailman brought.

Have a nice weekend

//RoB

Wow

[sebackman]

PM sent.

[NWCgrad]

Look what the mailman brought.

Have a nice weekend

//RoB

RoB,

Are all the badges spoken for? The ones with the orange color would be awesome on my big blue JBL-inspired diy speakers.

Best//Steve

[sebackman]

Here are the one I have left. Small are 30x30mm and larger 30x40mm. I have only 3 pairs of the larger ones. About 3mm thick. PM with needs :-) .

I will try to get more of the black/White 30x30mm next week.

Kind regards
//Rob

[ivica]

Since the JBL Master Reference Monitor thread is so massive I'm staring a thread that I and others can document our M2 DIY process if the. Here are some links that I was able to reference. Thank you for all of your contributions that made my and others project happen.

Schematic of the M2 - Note: C2 in the schematic shows a value of 33.3uf, this is a typo. the correct value is 3.3uf

DSP File

Inside the M2

Outside the M2

M2 Dimensions

Horn Mounting

Horn Mounting pt2

Hi srm51555,

Thank You for all information

Ivica

[baldrick]

According to rumours JBL have stopped selling M2 parts without valid M2 serial, so there's a chance they will not be avilable very much longer

[1audiohack]

None of the parts show up on the pro service site amymore, not even the 2216.

Glad I got all mine! Anyone who didn't might be out of luck.

Barry.

[DES-1]

Just picked up my waveguides two days ago, a local shop ordered them for me and they took three weeks to come in. Last parts I need are the 2216.