Page 25 of 43 FirstFirst ... 15232425262735 ... LastLast
Results 361 to 375 of 636

Thread: Project M2 DIY Thread

  1. #361
    Member
    Join Date
    May 2015
    Location
    TN, USA
    Posts
    91
    I don't see a need to go Crown, unless you just want the prebuilt filters. Lake and Lab are top tier gear, but you probably already know that.

  2. #362
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    Paris, France
    Posts
    2,546
    Quote Originally Posted by Cyrilio View Post
    But I am happy to share the stl drawing that maybe use to print on other printer. You can find on some internet platform community sharing for 3D printing near where you are based. Of course you need to pay for the print, but will be more easy. You just need to send the stl, and the guy will print it for you.
    (...)
    I can create a account on THINGIVERSE and share the stl.
    That would be fantastic!
    While you are at it could you also please share the plans of the cabs?

    Concerning filter and amplification, I use a LAKE LM226 and a LAB GRUPEN FP6000Q but intend in some time to go the official Crown, just to be sure that I get the best of the M2 even if it seems that the LAB handle it perfectly...
    You can also simply rent a Crown amp for a weekend and compare on your system.

    Alas reporting settings from the crown to another device is not a guaranty of good result, as each unit will typically "interpret" settings in different ways.
    For example the "corner" frequency of a shelving filter can be the center of the shelving on some devices and the - or + 3dB points on others.
    And even with units using similar EQ/shelving conventions, results might differ because of biquads calculation approximations.

    I had to modify the theoretical settings for the rephase preset based on looped measurement of BSS units (thanks to Grumpy and Robert) to take into account the approximations/interpretations the BSS unit is doing.
    If you can measure the output of your unit you should be able to compare it to the curves that rephase will output based on these presets, and modify your settings accordingly.

    By the way can you load externally generated FIRs in the LM26?

  3. #363
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    Quote Originally Posted by Cyrilio View Post
    My turn to post my DIY M2
    Indeed!

    Made my day!

  4. #364
    Junior Member
    Join Date
    Nov 2016
    Location
    Prizren
    Posts
    15
    Just got Crown XTi for testing from JBL dealer I can keep them for a week!
    Will test tomorrow M2 which is dry-ing from painting...
    Tonight I`m testing DIY Tannoy the sound I`m familiar.


    Name:  xti.jpg
Views: 912
Size:  96.3 KB

  5. #365
    Junior Member
    Join Date
    Nov 2016
    Location
    Prizren
    Posts
    15
    I bought BSS BLU-50 from an official dealer, needed for JBL-M2 processing, but it can't be detected from home network router (ASUS RT-N12+).

    Should it work on my router or it requires a switch with PoE+ support or some other kind of connection device ?

    Please help me if there is anything else that is important for connecting BLU-50 on a network to load processing files ?

  6. #366
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,658
    Sorry if some of this is obvious.
    Have you made sure to plug your ethernet cable into the ethernet port, and not the blu-link port?
    The other end should go to a router. The router should be set up for DHCP. If the router works with regular PCs it is probably set up OK.
    You are using an AC adapter to power the Blu50? It has some LEDs on to indicate that it has power?
    Does the tiny led in the connector light up green when the network cord is plugged in?
    Tried pressing the locate button?
    Run the net-setter software to check if it is visible on the network?

    https://3e7777c294b9bcaa5486-bc95634e606bab3d0a267a5a7901c44d.ssl.cf2.rackcdn.c om/product_documents/documents/2077_1475859147/BLU-50_Install_Guide_5040341-C_original.pdf

    http://web.media.mit.edu/~benb/stati...nual/MAIN.html

  7. #367
    Member
    Join Date
    May 2015
    Location
    TN, USA
    Posts
    91
    Quote Originally Posted by agronk View Post
    I bought BSS BLU-50 from an official dealer, needed for JBL-M2 processing, but it can't be detected from home network router (ASUS RT-N12+).

    Should it work on my router or it requires a switch with PoE+ support or some other kind of connection device ?

    Please help me if there is anything else that is important for connecting BLU-50 on a network to load processing files ?
    Make sure you're using a straight Cat5 or Cat6 cable. Patch between one of the yellow ports on the router and the Ethernet port on the Blu50. PoE+ isn't necessary if you're powering the Blu50 locally using a 12v DC power supply. If not, you can pick up a PoE+ injector...you will need a second Cat5 or Cat6 patch cable for the injector. Make sure the injector is actually PoE+ and not just PoE, as PoE doesn't provide enough wattage to power the Blu50.

  8. #368
    Senior Member
    Join Date
    Aug 2003
    Location
    tampa
    Posts
    114
    Quote Originally Posted by Cyrilio View Post
    My turn to post my DIY M2, Thanks Lansing Heritage who helps a lot in getting the info to make it happen...
    https://youtu.be/eoSUc_U-tWg
    Awesome work. Now I have a case of tablesaw envy

  9. #369
    Junior Member
    Join Date
    Nov 2016
    Location
    Prizren
    Posts
    15
    I can't find my BSS BLU-50 on my router network map.
    I tried changing the router and connect it directly to PC but still doesn't show up. COM LED is green and ERR is not telling anything.
    Is there an issue with my BLU-50 or I'm missing something setting it up ?

  10. #370
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,658
    I still don't know much about your setup. You do have the AC adapter? You do have a PC with Audio architect and Net Setter installed and connected to the router?
    Connect the cat 5 cable to both the router and the Blu-50. Then power cycle the Blu-50. It should get an IP address from the router when it boots. Then run the BSS net setter software on the PC connected to the same router. The PC may ask you to bypass any firewall software when running net-setter.
    You should see the Blu-50 in a list of connected devices.
    Once you can see the device in net setter you will want to start Audio Architect. Drag a Blu-50 from the device tree on the left to your design field. Then you would be able to match devices and go online. You could call BSS for help. They have been helpful with email support to me.

  11. #371
    Senior Member srm51555's Avatar
    Join Date
    May 2013
    Location
    Wisconsin
    Posts
    502
    Id call BSS if you can too, I've talked to them on several occasions and they are pretty helpful. They will actually talk you through troubleshooting on your PC.

  12. #372
    Member
    Join Date
    May 2015
    Location
    TN, USA
    Posts
    91
    Quote Originally Posted by agronk View Post
    I can't find my BSS BLU-50 on my router network map.
    I tried changing the router and connect it directly to PC but still doesn't show up. COM LED is green and ERR is not telling anything.
    Is there an issue with my BLU-50 or I'm missing something setting it up ?
    Did you buy this new or used? It's possible it's been set to a static IP, and without knowing what it is you won't be able to connect to it. Maybe try a factory reset, although I do not know what that procedure is.

    Also, if it is in DHCP, and not static, and you're connecting directly from a computer and not through a router, you'll need to set your computer to an IP range that is in the same range as the DSP. However, I think you should be able to connect to it without doing this when using a router.

  13. #373
    Junior Member
    Join Date
    Nov 2016
    Location
    Prizren
    Posts
    15

    Bss Blu-50

    I managed to make it online and linked with blu usb, but the Bss file in Jbl site doesn`t work with my Blu-50
    and it opens only on London architect!!
    Can someone make it Audio architect file for Bss Blu-50 with blulink as source and send me?

  14. #374
    Senior Member srm51555's Avatar
    Join Date
    May 2013
    Location
    Wisconsin
    Posts
    502
    Quote Originally Posted by agronk View Post
    I managed to make it online and linked with blu usb, but the Bss file in Jbl site doesn`t work with my Blu-50
    and it opens only on London architect!!
    Can someone make it Audio architect file for Bss Blu-50 with blulink as source and send me?
    I'll see if I can convert to a different BSS unit like in London Architect this weekend. You could always make your own file, it's not too much of a pain.

    HP
    http://www.audioheritage.org/vbullet...l=1#post385042

    LP
    http://www.audioheritage.org/vbullet...l=1#post385043

  15. #375
    Junior Member
    Join Date
    Nov 2016
    Location
    Prizren
    Posts
    15
    Quote Originally Posted by srm51555 View Post
    I'll see if I can convert to a different BSS unit like in London Architect this weekend. You could always make your own file, it's not too much of a pain.

    HP
    http://www.audioheritage.org/vbullet...l=1#post385042

    LP
    http://www.audioheritage.org/vbullet...l=1#post385043
    That would be wonderful
    Thank`s a lot

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL LN3 Project, *Official Thread
    By Nightbrace in forum Lansing Product DIY Forum
    Replies: 58
    Last Post: 07-13-2016, 03:08 PM
  2. Fundraising request; donations to Lansing Heritage Project May loudspeaker project
    By mikebake in forum Lansing Product General Information
    Replies: 7
    Last Post: 04-21-2011, 12:37 PM
  3. Project May, similar privat project?
    By Flodstroem in forum Lansing Product DIY Forum
    Replies: 14
    Last Post: 02-21-2007, 02:42 PM
  4. Fundraising for Project May Loudspeaker project
    By mikebake in forum Public Forum - Announcements
    Replies: 0
    Last Post: 02-10-2004, 07:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •